View Single Post
  #6  
Old November 18th 19, 12:11 AM posted to rec.aviation.soaring
Dan Daly[_2_]
external usenet poster
 
Posts: 718
Default How did you install your FLARM brick and/or ADS-B Out?

On Sunday, November 17, 2019 at 1:17:18 PM UTC-5, wrote:
Is it powered direct or by another instrument?
Did you install a dedicated fuse?
Did you install a dedicated off/on switch or is it slaved?
Do you use a dedicated GPS antennae or split with another instrument.
Do you ever have the in-flight need to turn it off?
If you have both, why would you fly with one on and not the other?
If necessary, how is the Trig -2X and the TN-72 software updated?

Thanks for your reply.


I have CORE only:
Is it powered direct or by another instrument?
Directly; display is powered by RJ45.
Did you install a dedicated fuse?
CB
Did you install a dedicated off/on switch or is it slaved?
Dedicated switch
Do you use a dedicated GPS antennae or split with another instrument
Dedicated provided GPS antenna (provided). Followed installation instructions for GPS and antenna spacing.
Do you ever have the in-flight need to turn it off?
Flying since 2012 with it; it is the last instrument to go off in my cockpit (if low power).