Did some how to debug experiments on my box.

If you power the flarm up with an empty flash drive plugged in and wait till no blinking for 60 seconds, what does it write on the flash drive?

Aside from a bunch of IGC's, mine wrote a .csv and .txt file.

Each showed the transponder id.

To debug flarm, I sometimes boot with a blank flash except for versions of this flarmcfg.txt to get it to dump the write info into a log.


################################################## ##################################
#Sets Default
#PFLAC,S,DEF

################################################## ######################
#Clears IGC Logs
#PFLAC,S,CLEARLOGS

################################################## ######################
# This allows you to confirm your settings.
$debug_out,fat,scheduler|config|baro|rf|gps|pffsm, all

################################################## ######################
# Writes a diagnostic dump (PFSSSSS.DMP) to the USB stick.
# Existing files with the same file name will be overwritten
# file is ?format binary.
#file,dump