Could you give some information on the required tool modifications?
Thanks.
OK


9-5-2020 19:52 wrote:
On Tuesday, May 5, 2020 at 10:17:09 AM UTC-4, soaringjac wrote:
See the link below

http://www.ltb-lindner.com/g-102-ad-...rod_200408.pdf

Our Grob 102 Astir CS had the "welded version" elevator pushrod consistent with the Service Bulletin.

BTW: All the hardware requires 10 mm wrenches. The elevator pushrod bolt & nut required a modified box wrenches.

Chuck Zabinski