On 12 Mar 2006 09:31:42 -0800 in sci.electronics.design, "Andrew
Sarangan" wrote,
I also used the laser printer toner transfer method for my LED design
which I posted a couple of weeks ago. I originally discovered the
technique from http://www.fullnet.com/u/tomg/gooteepc.htm
The paper came off easily in water and a gentle scrub. One problem I
noticed is that the gloss sticks to the ink more than the paper. So
when the paper peels off, the gloss stays on the ink.

I find it easy to remove the residue by scrubbing the board with a
dishwashing brush with soft plastic bristles while the board is wet.