That looks like some *really* good stuff.

Not recommended for plastics and keep it away from motor oil and brake fluid
(or at least don't immerse for 30 days at almost 200 degrees F like they
did).
Strangely enough, immersing in unleaded gasoline gives it 110% strength!

Eric

"Blueskies" wrote in message
gy.com...
This is some good stuff - the aluminum will fail before the joint...

http://www.hernonmfg.com/categories/charts/react.htm

http://www.hernonmfg.com/tds/td-761.pdf

--
Dan D.