On Saturday, April 27, 2019 at 11:37:44 AM UTC-5, AS wrote:
To all the avionics-buffs out there in glider-land:
What is the proper designation for the type of microphone cable used to run from the 'Becker-' or 'Dittel-' speaker box to the radio on the panel? The one sample I have has two wires (white and brown) surrounded by a copper braided shield plus two fiberglass strands - presumably to add tensile strength - in it. Need a few feet of it to avoid splicing it.
Thanks,
Uli
'AS'
Uli,
To run wiring from the speaker box to the transceiver you will need 5 or 6 conductor shielded (Tefzel) cabling for; mic, mic ground, PTT, speaker, non-mic ground.
You can find complete wiring schematics for both Dittel and Becker speaker boxes in my presentation at
http://aviation.derosaweb.net/presen...s/#transceiver.
If you are simply extending the cable from the microphone to the speaker box
you can use 1 or 2 conductor shielded (Tefzel) cable.
- John OHM Ω