Mike -

The Maule tester is essentially a spring loaded rod in a tube. The rod has
a rounded end. The rod is placed against the fabric and pressure applied
to the tube which compresses a spring. There is a scale on the side of the
tube with graduations from 10 to 80 lbs in five lbs increments (if I
remember correctly). You might be able to find a picture in Aircraft
Spruce, Wicks, or other catalog.

New fabric will stretch with applied pressure all the way to 80 lbs. A
small dimple will be left in the fabric which will disappear completely
after an hour or so. Older fabric will probably experience cracking of the
dope (you can hear it) way before 80 lbs due to the plasticizer hardening.
On my previous Taylorcraft this happened at 65lbs (1977 covering). These
cracks will appear as ring worm and should be sanded down to silver and
repainted as light may degrade the fabric through the cracks.

If you are testing a prospective airplane the owner will probably be
annoyed if you use the tester and leave ring worm all over his baby.

Before selling my aircraft I had the test done. We did one or two areas to
determine where it cracked, then backed off 10 lbs for the next 30-40 test
locations. We indicated the lower number in the log book.

Hope this helps,

- Carl -