![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() |
#2
|
|||
|
|||
![]()
Netko wrote:
This is a malformed message, to whit: MIME-Version: 1.0 User-Agent: Hogwasher/4.3 Content-Type: message/partial; number=1; total=2; " X-Usenet-Provider: http://www.giganews.com NNTP-Posting-Host: 88.110.210.17 X-Trace: sv3-EmZdFxGGEIRgqiolQwKsyTgGXdiFyea9mhgAyZbWThXfvP7Xz9 X+lKySeNW8W8Mt6fvQhTO86NgCKg4!Y/bTbVbOUiLFmZfA/OQahUfSRyfipcgz99DtRapcMjklxU18+CWXP042G8+BKlukzs3 v9xQbicNb!M2anjaBLSgobJbfIcox7SEf7Qal3Jr6pOckG X-Complaints-To: X-DMCA-Complaints-To: X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly X-Postfilter: 1.3.40 Xref: paranoia.mcleod-schmidt.id.au alt.binaries.pictures.military:871 alt.binaries.pictures.aviation:48226 Message-ID: m MIME-Version: 1.0 Subject: Vigorous Dragon See that blank line up there, 'tween the Xref and Message-ID headers? It's an error. I've reported it to the "Hogwasher" developers, let's see what, if anything, happens. Cheers, Gary B-) |
#3
|
|||
|
|||
![]()
On Thu, 1 Oct 2009 15:49:12 +0100, Gary R. Schmidt wrote
(in article ): See that blank line up there, 'tween the Xref and Message-ID headers? It's an error. Interesting, even though I have no idea of its significance or practical effect. Curiously, Hogwasher's headers for that message contain no blank line, nor is it present on the newsreader function in Entourage. Does it mess up your ability to view the text and/or picture? I've reported it to the "Hogwasher" developers, let's see what, if anything, happens. In my experience, Asar are exceedingly prompt at responding. I once reported a very rare problem with Hogwasher and they diagnosed it and replied to me within 24 hours. Mind you, my experience is limited as normally Hogwasher just works. |
#4
|
|||
|
|||
![]()
Netko wrote:
On Thu, 1 Oct 2009 15:49:12 +0100, Gary R. Schmidt wrote (in article ): See that blank line up there, 'tween the Xref and Message-ID headers? It's an error. Interesting, even though I have no idea of its significance or practical effect. Curiously, Hogwasher's headers for that message contain no blank line, nor is it present on the newsreader function in Entourage. Well, the RFCs say that a message header is terminated by a line that is empty _or_ consists of only whitespace (i.e. logically empty), so software written to that stops thinking and just tries to display what follows, but as the "Content-Type" header appears in the body of the message it is not parsed so the message is not displayed correctly. Does it mess up your ability to view the text and/or picture? Yes, the messages are malformed, Thunderbird just sees as a "message/partial" attachment. It looks like it only appears in the *first* part of a multi-part posting, single-part postings do *not* show the problem. Hmm, I'll rephrase that to "two part posts", I wonder what happens with three? I've reported it to the "Hogwasher" developers, let's see what, if anything, happens. In my experience, Asar are exceedingly prompt at responding. I once reported a very rare problem with Hogwasher and they diagnosed it and replied to me within 24 hours. Mind you, my experience is limited as normally Hogwasher just works. Hopefully they will respond to a message from a non-user. (No response as yet.) Cheers, Gary B-) |
#5
|
|||
|
|||
![]()
On Fri, 2 Oct 2009 14:05:27 +0100, Gary R. Schmidt wrote
(in article ): It looks like it only appears in the *first* part of a multi-part posting, single-part postings do *not* show the problem. Hmm, I'll rephrase that to "two part posts", I wonder what happens with three? I'll post a picture in a moment which has a reduced part size, my intention being to force it into three parts. Then we'll know for sure. |
#6
|
|||
|
|||
![]() |
#7
|
|||
|
|||
![]() |
#8
|
|||
|
|||
![]() |
#9
|
|||
|
|||
![]()
Netko wrote:
On Fri, 2 Oct 2009 14:05:27 +0100, Gary R. Schmidt wrote (in article ): It looks like it only appears in the *first* part of a multi-part posting, single-part postings do *not* show the problem. Hmm, I'll rephrase that to "two part posts", I wonder what happens with three? I'll post a picture in a moment which has a reduced part size, my intention being to force it into three parts. Then we'll know for sure. Amusing - the *first* post has the blank line in the header, the second and third posts do *not* have the blank line in the headers. So, by extrapolation, only the _first_ post in a multi-part post is malformed. Cheers, Gary B-) |
#10
|
|||
|
|||
![]()
These are excellent pictures.
I'm wondering why you post many of them in multiple parts, though. The file sizes look as though they would be OK without the need to break them up. Cheers, Indrek Aavisto -- Criticism is easy; achievement is difficult. W.S. Churchill |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vigorous Dragon - index.jpg (1/1) [87K] | Netko | Aviation Photos | 1 | September 30th 09 01:27 AM |
Dragon Rapide | jd | Aviation Photos | 0 | April 15th 09 01:05 AM |
500k in Carbon Dragon | Leo Benetti-Longhini | Soaring | 2 | June 10th 08 09:11 PM |
FA: Red Dragon Aircraft Preheater | John Morley | Aviation Marketplace | 0 | October 24th 07 03:55 PM |
carbon dragon | Philippe Vessaire | Home Built | 1 | July 28th 03 03:16 PM |