![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi,
I own a 1967 Cherokee 235B and am in need of a prop cable. Does anyone know where I might be able to find a PMA'd new one, or a salvage company that may have one? I've tried Aircraft Spruce, and McFarlands and neither have a PMA'd cable for early Pipers as well as a couple salvage company's (including Wentworth) with no luck. Any help would be much appreciated. TIA. z |
#2
|
|||
|
|||
![]()
I would get something like that new from a piper dealer.
Try Muncie http://www.muncieaviation.com or www.piperparts.com or www.dmfs.com "zatatime" wrote in message ... Hi, I own a 1967 Cherokee 235B and am in need of a prop cable. Does anyone know where I might be able to find a PMA'd new one, or a salvage company that may have one? I've tried Aircraft Spruce, and McFarlands and neither have a PMA'd cable for early Pipers as well as a couple salvage company's (including Wentworth) with no luck. Any help would be much appreciated. TIA. z |
#3
|
|||
|
|||
![]()
On Mon, 10 May 2004 04:16:47 GMT, "GFC" wrote:
I would get something like that new from a piper dealer. Try Muncie http://www.muncieaviation.com or www.piperparts.com or www.dmfs.com "zatatime" wrote in message .. . Hi, I own a 1967 Cherokee 235B and am in need of a prop cable. Does anyone know where I might be able to find a PMA'd new one, or a salvage company that may have one? I've tried Aircraft Spruce, and McFarlands and neither have a PMA'd cable for early Pipers as well as a couple salvage company's (including Wentworth) with no luck. Any help would be much appreciated. TIA. z Thanks for the reply. I'm hoping to avoid Piper if possible for this one. The guy I bought the plane from said he paid $625.00 for a new cable in '97 and it only lasted 300 hours. Now it's a modest $425.00! I wouldn't mind the price if it were built well, but the construction of the vernier is pretty shoddy so I'm hoping to obtain one from somewhere other than the factory. You're links did help, and are now book marked. Thanks again. z |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sport Prop blades needed | Ron | Aviation Marketplace | 0 | February 19th 04 11:12 PM |
Cessna Prop Needed | Cy Galley | Aviation Marketplace | 0 | January 23rd 04 01:23 AM |
IVO props... comments.. | Dave S | Home Built | 16 | December 6th 03 11:43 PM |
Cable parts needed in Dallas | dave | Home Built | 4 | October 23rd 03 04:12 AM |
Paraplane prop needed | Dan | Aviation Marketplace | 1 | September 27th 03 04:49 PM |