![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
My rotating beacon stopped rotating and I need to replace it. I would like
to do this as economically as possible as I don't do a whole lot of night flying and would rather spend the money on avgas. It seems my options are limited to the Whelen HRCFA strobe - I tried to use a 70509 flasher but the mounting bracket is not for a 3 3/4 inch hole. Any suggestions? Thanks Patrick take out the **** to respond |
#2
|
|||
|
|||
![]()
Patrick Mathews wrote:
My rotating beacon stopped rotating and I need to replace it./snip/ It seems my options are limited to the Whelen HRCFA strobe - I tried to use a 70509 flasher but the mounting bracket is not for a 3 3/4 inch hole. Patrick, The 50519 Adapter will allow the 70509 to mount in a 3 3/4" hole. Happy Flying! Scott Skylane N92054 |
#3
|
|||
|
|||
![]()
Patrick,
I have a spare 28V Grimes rotating Beacon. I think that it is the right diameter. Let me know if you are interested. Bob |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Piper Cherokee RFI Capacitor | mikem | Home Built | 0 | January 16th 04 05:09 PM |
FS: Piper Side Window (New) | JimC | Aviation Marketplace | 0 | August 10th 03 12:19 PM |