![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Ok, here is one for you.
The other night, about the time I landed, I hear a pop and remember seeing a visible flash. I see the amp gauge has a big discharge. After I taxied off, I try resetting the alt half of the master. The high volt light is dimly lit and glows brighter when I turn off half the master but that doesn't fix anything. I find that a breaker is popped, so I reset it and everybody is happy again. It is getting pretty late so I put the machine away. Any ideas? Everything that was on, kept working. Now I don't know know if it was the field or output breaker but I am guessing by the flash of light that it was the main. Pretty hard to trouble shoot a problem that isn't there now, but I am at least going to take a look at the back of the panel with a mirror for signs of arcing just in case something is loose and bouncing around. (interestingly this happened during one of my better landings) Where I was raised, blown breakers aren't something to be ignored. Mike Z. |
Thread Tools | |
Display Modes | |
|
|