![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I am finishing up my KIS Tr-1 aircraft & am curious if anyone out there
has experimented with adjustable seats in their aircraft. I have heard that you can get such hardware from auto parts manufacturers, but I don't know how to evaluate them, or how to specify what might be needed. Any help or advice on this subject would be greatly appreciated. Thanks, Evan Carew |
#2
|
|||
|
|||
![]()
In article , Evan Carew
writes: I am finishing up my KIS Tr-1 aircraft & am curious if anyone out there has experimented with adjustable seats in their aircraft. I have heard that you can get such hardware from auto parts manufacturers, but I don't know how to evaluate them, or how to specify what might be needed. Any help or advice on this subject would be greatly appreciated. Thanks, Evan Carew Evan, I have several photos of my installation setup on my web site. I used seats from a GeoTracker and rails from a Mazda. Both were heavily modified to fit but the installation seems to work well with about 5 inches of forward to back movement with an over an inch of vertical in the process. (Forward and up, back and down). Check it out. By the way, my site has hundreds of photos and detail on your plane. Bob Reed www.kisbuild.r-a-reed-assoc.com (KIS Builders Site) KIS Cruiser in progress...Slow but steady progress.... "Ladies and Gentlemen, take my advice, pull down your pants and Slide on the Ice!" (M.A.S.H. Sidney Freedman) |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adjustable Rudder Pedals | Calvin R. Walker | Home Built | 0 | January 23rd 04 04:36 AM |
Wicker or caned seats for a biplane | Ebby | Home Built | 7 | December 23rd 03 06:31 AM |
Hydraulic CS prop converting to Adjustable prop? | Scott VanderVeen | Home Built | 0 | December 5th 03 05:54 PM |
epoxy aircraft seats? | Lpmcatee356 | Home Built | 26 | December 3rd 03 11:16 PM |
Looking for ejection seats | Rafi Yoeli | Home Built | 1 | July 15th 03 05:43 AM |