![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I fly a Cessna P206 hauling skydivers. Today on one of the drops a
glove somehow managed to become jammed between the mass balance and the end of the stab which jammed the elevator in about the 1/3 "up" position. I could see two fingers sticking up above the elevator with something flapping on the underside. The airplane was pitching up and I had to roll into a bank to slice the nose down to keep from stalling. I went through several repetitions of that until I found a power setting that lessened the pitch-up, then I was able to force the yoke forward slightly and stablized in a slight descent at 80kts IAS. I got the boss on the radio and headed the airplane toward a deserted area that would be okay to bail out over if needed and would be a good place for the airplane to crash if it came to that. The jumpers had exited at 13000, I was at about 11,500 when I got things stablized. I got ready to bailout (tightened the leg straps, tightened the lap belt, felt the lap belt release and the ripcord handle) and then planned on how to fix the problem. I decided to try and force the glove out by moving the elevator. I first pulled on the yoke and was able to get almost full up elevator but it was still not free and took a great deal of effort to move the yoke. This of course pitched me up sharply so I rolled left and as the nose started down rolled level and pushed the yoke forward. I was only doing about 60-65kts when I pushed so I wasn't worried about breaking the airplane, but I'm here to tell ya a 206 makes some odd noised when you push that hard negative. G I think it was the air over the vent intakes...weird sound. The elevator was still not free as I pitched over, I was thinking it was looking more and more like I was going to have to jump...I pulled hard on the yoke and this time things came free. The glove (or whatever it was) was gone and the controls now worked normally. A gentle descent and landing followed by a close look at the airplane. The only damage was a slight bend in the stab top skin where the glove was jammed. (The flightsuit can be cleaned G) One risk of hauling skydivers is that a jumper may have a parachute open on the step which can lead to the tail being damaged or removed from the airplane. Because of this I've thought about what I would do if that should occur. I've even practiced flying with the yoke held in one position to simulate a jammed elevator. Today it paid off. -- Dale L. Falk There is nothing - absolutely nothing - half so much worth doing as simply messing around with airplanes. http://home.gci.net/~sncdfalk/flying.html |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Space Elevator | Big John | Home Built | 111 | July 21st 04 04:31 PM |
Space slingshot was: Space Elevator | Keith Goodwin | Home Built | 1 | June 29th 04 04:11 PM |
Wanted - Cessna U206A elevator | Colin Fitzmaurice | Owning | 0 | May 18th 04 11:06 AM |
Wanted - Cessna U206A elevator | Colin Fitzmaurice | Owning | 0 | May 18th 04 11:05 AM |
Wanted - Cessna U206A elevator | Colin Fitzmaurice | Owning | 0 | May 1st 04 03:51 PM |