|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
October 17th 04, 04:43 AM
|
|||
|
|||
Power questions
I've been looking at the performance charts for the Lycoming O-320-B and D series
engines. There's a line that is labeled "Limiting manifold pressure for continuous operation". This line starts at sea level and 2400 rpm, runs through 2300 rpm at about 2,000' ASL, and continues to 2000 rpm at about 6,500' ASL. Does this mean that I am not supposed to operate this engine at 2000 rpm below 6,500' ASL? I have a fixed pitch prop. George Patterson If a man gets into a fight 3,000 miles away from home, he *had* to have been looking for it. 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Homebuilt Aircraft Frequently Asked Questions List (FAQ) | Ron Wanttaja | Home Built | 40 | October 3rd 08 03:13 PM |
| Homebuilt Aircraft Frequently Asked Questions List (FAQ) | Ron Wanttaja | Home Built | 0 | December 2nd 04 07:00 AM |
| Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | June 2nd 04 07:17 AM |
| Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | May 1st 04 07:29 PM |
| Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 2 | February 2nd 04 11:41 PM |
Threaded Mode