|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
September 21st 15, 02:28 AM
posted to rec.aviation.soaring
|
|||
|
|||
ASW19 Inner Tube
I'm looking to buy a spare inner tube for my 19 but I don't have the tube handy to take measurements. I know it's a 500 x 5 with a 90 degree bend in the valve stem but I don't know if I need a long valve stem or a short valve stem. Any assistance is appreciated! Thanks in advance.
|
|
#2
September 21st 15, 03:54 PM
posted to rec.aviation.soaring
|
|||
|
|||
|
ASW19 Inner Tube
I had a 19 over 20 years ago so I don't really remember. I would
suggest, however, that you go with the short valve stem and have an extension in the aircraft. Reason being that, if the stem is too long, one revolution of the wheel will remove it. On 9/20/2015 7:28 PM, wrote: I'm looking to buy a spare inner tube for my 19 but I don't have the tube handy to take measurements. I know it's a 500 x 5 with a 90 degree bend in the valve stem but I don't know if I need a long valve stem or a short valve stem. Any assistance is appreciated! Thanks in advance. -- Dan, 5J
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ASW19 Tail Dolly | Jay Allardyce | Soaring | 8 | July 26th 16 10:04 PM |
| asw19 airbrake kit | steve[_2_] | Soaring | 2 | April 7th 11 08:32 PM |
| Refinish and Repair ASW19 and Russia | Jim Rizzo | Soaring | 3 | November 30th 07 03:24 PM |
| Asw19 Winglets for sale | Gregg Leslie | Soaring | 0 | November 21st 06 02:31 PM |
| ASW19 performance mods | Jim Crowhurst | Soaring | 2 | June 3rd 05 12:18 PM |
Linear Mode
