![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi Everyone,
I have a Glide Navigator II customer with an iPAQ h5455 and neither of us can get it work with Glide Navigator II - or any other GPS program. I've tried using a GPS test utility called Crux_View that allows me to test each serial port one at a time. I'm connected to a GPS-NAV but can't see the GPS data. I'm writing to ask if any of you (technical bunch that you are) have had success with an iPAQ h5455 and a GPS connected through the RS-232 serial data port on the bottom of the unit. Please let me know if you have. Also, I'm wondering if perhaps the problem is caused by a setting that is set incorrectly. I'm usually very good at getting Pocket PCs to work. I've played with dozens of them over the last few years. But I'm hoping that someone in this group will have run into this issue before and have a suggestion. Glide Navigator can't find GPS data so it eventually quits trying to find the GPS and runs in simulator mode. That makes sense since the Crux_View utility can't see GPS data on comm ports 1 to 9. I've tried doing a soft reset. The BlueTooth Radio is turned off. Wireless Ethernet is turned off. Any suggestions? Thanks, Paul Remde Cumulus Soaring Supplies http://www.cumulus-soaring.com |
#2
|
|||
|
|||
![]()
Hi,
I forgot to mention that my iPAQ 3970 works fine with the GPS-NAV and GN II with both the iPAQ cradles (his and mine) I'm using for testing. Paul Remde "Paul Remde" wrote in message news:6Buqc.31424$6f5.2975126@attbi_s54... Hi Everyone, I have a Glide Navigator II customer with an iPAQ h5455 and neither of us can get it work with Glide Navigator II - or any other GPS program. I've tried using a GPS test utility called Crux_View that allows me to test each serial port one at a time. I'm connected to a GPS-NAV but can't see the GPS data. I'm writing to ask if any of you (technical bunch that you are) have had success with an iPAQ h5455 and a GPS connected through the RS-232 serial data port on the bottom of the unit. Please let me know if you have. Also, I'm wondering if perhaps the problem is caused by a setting that is set incorrectly. I'm usually very good at getting Pocket PCs to work. I've played with dozens of them over the last few years. But I'm hoping that someone in this group will have run into this issue before and have a suggestion. Glide Navigator can't find GPS data so it eventually quits trying to find the GPS and runs in simulator mode. That makes sense since the Crux_View utility can't see GPS data on comm ports 1 to 9. I've tried doing a soft reset. The BlueTooth Radio is turned off. Wireless Ethernet is turned off. Any suggestions? Thanks, Paul Remde Cumulus Soaring Supplies http://www.cumulus-soaring.com |
#3
|
|||
|
|||
![]()
Paul, Have you considered trying a bluetooth gps (if
you have one available?)At 21:06 18 May 2004, Paul Remde wrote:Hi,I forgot to mention that my iPAQ 3970 works fine with the GPS-NAV and GN IIwith both the iPAQ cradles (his and mine) I'm using for testing.Paul Remde'Paul Remde' wrote in messagenews:6Buqc.31424$6f5.2975126@attbi_s54... Hi Everyone, I have a Glide Navigator II customer with an iPAQ h5455 and neither of us can get it work with Glide Navigator II - or any other GPS program. I've tried using a GPS test utility called Crux_View that allows me to testeach serial port one at a time. I'm connected to a GPS-NAV but can't see theGPS data. I'm writing to ask if any of you (technical bunch that you are) have had success with an iPAQ h5455 and a GPS connected through the RS-232 serial data port on the bottom of the unit. Please let me know if you have. Also, I'm wondering if perhaps the problem is caused by a setting that is set incorrectly. I'm usually very good at getting Pocket PCs to work. I've played with dozens of them over the last few years. But I'm hoping that someone inthis group will have run into this issue before and have a suggestion. Glide Navigator can't find GPS data so it eventually quits trying to find the GPS and runs in simulator mode. That makes sense since the Crux_View utility can't see GPS data on comm ports 1 to 9. I've tried doing a soft reset. The BlueTooth Radio is turned off. Wireless Ethernet is turned off. Any suggestions? Thanks, Paul Remde Cumulus Soaring Supplies http://www.cumulus-soaring.com |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
iPaq and LX5000 connectivity question (hardware?) | Ted Wagner | Soaring | 1 | April 22nd 04 09:29 PM |
Commercial - iPAQ Cradle Changes | Paul Remde | Soaring | 0 | April 9th 04 03:29 PM |
iPaq wiring, cradles and mounts for gliders - Ideas?? | Jim Kelly | Soaring | 12 | December 4th 03 11:45 PM |
iPAQ h2210/h2215 Review | Paul Remde | Soaring | 0 | September 3rd 03 03:45 AM |
iPaq screen viewability | Raphael Warshaw | Soaring | 7 | July 27th 03 06:02 PM |