![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Back about thirty years or so, Cleveland wheels and brakes became popular
replacements for the Goodyear systems on planes like older Cessna 172s. These used wheel and brake sets often ended up on the homebuilt market. My own Fly Baby has one of these units. About a year and a half ago, a through-bolt came loose on one of my wheels and munched the brake puck on one of my Goodyears. The puck is just a flat little kidney-shaped pad about an inch across, but I was astounded to find the replacement cost was about $200, with the only source apparently being Aircraft Spruce. Being naturally cheap (and recently downsized from my job), I was loath to pay that much, so I bought a hunk of scrap brake-pad material from the local auto-brake store and cut my own. http://www.bowersflybaby.com/stories/brake.HTM Soon after I posted my experiences with that, someone pointed out that Barry Jay aviation sold the pads for $15. But not long after *that*, Aircraft Spruce bought out Barry Jay and the $15 pads disappeared. Last week, though, I happily noticed that ACS is having a Close-Out sale on the old Barry Jay inventory, and the cheap pads are included! http://www.aircraftspruce.com/catalog/barryjay.php So if you have Goodyears, you might consider stocking up on brake pads. Be advised that the price is *per pair*. I ordered what I thought was "A pair and a spare", and now have eight pads.... Ron Wanttaja |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Building the Po' Boy Bending Brake | Veeduber | Home Built | 14 | March 1st 04 06:15 PM |
Sheet metal shear/press brake | VideoFlyer | Home Built | 7 | October 7th 03 07:08 PM |
Brake caliper flange | Stealth Pilot | Home Built | 5 | July 7th 03 04:19 PM |
Brake line design question | Charlie Smith | Home Built | 0 | July 2nd 03 12:31 PM |