|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
April 10th 05, 06:04 PM
|
|||
|
|||
Primer/Sealer
What type of primer/sealer is the best and easiest to apply before applying
the color coat on aircraft sheetmetal? Thanks for any info. 
|
|
#2
April 11th 05, 03:26 AM
|
|||
|
|||
|
Zinc Chromate or Zinc Oxide has been the choice of aircraft manufacturers
since the 40's for priming or coating aluminum for corrosion protection. Norm aka Mustanger www.aeromuseum.org
|
|
#3
April 11th 05, 04:12 AM
|
|||
|
|||
|
In article 2fl6e.25112$Vx1.1382@attbi_s01,
"mustanger" wrote: Zinc Chromate or Zinc Oxide has been the choice of aircraft manufacturers since the 40's for priming or coating aluminum for corrosion protection. Norm aka Mustanger www.aeromuseum.org Two-part epoxy primer over Alodine is the currently-preferred method -- especially when used with two-part polyurethane paints.
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
