|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
July 2nd 06, 10:47 AM
posted to rec.aviation.owning
|
|||
|
|||
C172N Flap indicator problem
My 172N has suddenly developed a problem where Flap actuation switch
does not work during 1st 10 degree position and requires lever to be around 12 degree before flaps work. Flap indicator will not return to zero and remains at above 10 degrees. Flaps travel to 40 degrees OK and work well as long as actuating lever is used between say 12 and 40 degree positions. Can the flap position follower cable jam/fail? Seems like something has slipped or stuck. thx, Arthur 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Negative flaps for better low speed aileron control? | [email protected] | Soaring | 41 | August 25th 05 06:01 AM |
| Stuck cowl flap cable | Jim Burns | Owning | 7 | March 24th 05 02:07 PM |
| Flap Hinge Moment Calc | Bo | Home Built | 2 | February 2nd 05 10:26 AM |
| Flap Hinge Moment Calc | Bo | Home Built | 0 | February 2nd 05 06:01 AM |
| Flap angles | DeltaDeltaDelta | Piloting | 34 | May 18th 04 12:09 AM |
Linear Mode
