![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
....to get a little stick time? I'm a newbie (about 180 hours split
between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Cheers, Mike |
#2
|
|||
|
|||
![]()
Mike wrote:
...to get a little stick time? I'm a newbie (about 180 hours split between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Cheers, Mike I'm mostly a lurker here but have you thought of a small or even an ultralight helicopter? There are many experts here that can tell you about them if fun flying is what you want. -- Bob U.S. Army Aviation (retired) Central Texas 5NM West of Gray Army/Killeen Regional (KGRK) |
#3
|
|||
|
|||
![]() boB wrote: Mike wrote: ...to get a little stick time? I'm a newbie (about 180 hours split between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Cheers, Mike I'm mostly a lurker here but have you thought of a small or even an ultralight helicopter? There are many experts here that can tell you about them if fun flying is what you want. Hmm, I've heard so many scary stories - how do you know if what you are gettnig yourself into is really safe and tested? |
#4
|
|||
|
|||
![]()
Mike
Not a bad idea but have you considered the Hiller 12 series? I've got several thousand hours in each and know of more than a few whyo have bought the H12's logged their time and sold them for at least what they paid. You might try to contact John Brigham with Bettencourt Helicopters in Atmore,CA for more info. John is boss of a helicopter ag outfit there and is pretty tuned in to who has what in helicopters in CA. Tell him Rocky said HI. I gave him his first dual in a Hiller many years ago. Mike wrote: ...to get a little stick time? I'm a newbie (about 180 hours split between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Cheers, Mike |
#5
|
|||
|
|||
![]()
"The OTHER Kevin in San Diego" skiddz "AT" adelphia "DOT" net wrote in
message ... On 13 Oct 2006 10:53:45 -0700, "Mike" wrote: ...to get a little stick time? I'm a newbie (about 180 hours split between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Twin Air in Van Nuys (Los Angeles area) has a Bell 47 that they train in. Give 'em a call and ask for Bob or Yo-Yo. Uhhhh, Yo-Yo???? |
#6
|
|||
|
|||
![]() I once had contacts for flying a Bell 47 near Sacramento - Mather Airport and Marin County Airport north of San Francisco. In the LA area go to Michael Zemlock in Chino (it was cheaper than a R22 there!). He's a DE. |
#7
|
|||
|
|||
![]() Steve R wrote: "The OTHER Kevin in San Diego" skiddz "AT" adelphia "DOT" net wrote in message ... On 13 Oct 2006 10:53:45 -0700, "Mike" wrote: ...to get a little stick time? I'm a newbie (about 180 hours split between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Twin Air in Van Nuys (Los Angeles area) has a Bell 47 that they train in. Give 'em a call and ask for Bob or Yo-Yo. Uhhhh, Yo-Yo???? Goes up and down a lot? |
#8
|
|||
|
|||
![]() Mike wrote: ...to get a little stick time? I'm a newbie (about 180 hours split ..snip Cheers, Mike Thanks to all with contact ideas. I'll look into these leads. Cheers, Mike |
#9
|
|||
|
|||
![]()
"JohnO" wrote in message
oups.com... Steve R wrote: "The OTHER Kevin in San Diego" skiddz "AT" adelphia "DOT" net wrote in message ... On 13 Oct 2006 10:53:45 -0700, "Mike" wrote: ...to get a little stick time? I'm a newbie (about 180 hours split between the 300C and the R22) and I would dearly like to buy a helicopter. No justification at all -- just a huge fascination with helicopters. I think my short list includes a Robinson or a Bell 47. But I've never flown a Bell and don't know a lot about them, such as real operating costs, onerous ADs, availability of parts and mechanics who really know them (in northern California). I'm not even sure where to start. I did take a 1-hour lesson in an F28 but the instructor seemed like a goof, and I'm not sure I got a good intro to that ship. I'm in the SF Bay Area at the moment, though I will end up in far northern California in a couple years. Twin Air in Van Nuys (Los Angeles area) has a Bell 47 that they train in. Give 'em a call and ask for Bob or Yo-Yo. Uhhhh, Yo-Yo???? Goes up and down a lot? Maybe? Reminds me of a flight I made many years ago. I was enjoying a lovely night flight, totally CAVU after a good frontal line cleaned all the smog out of the area earlier that afternoon. Anyway, I was tooling around monitoring Houston Approach on the south side of town. This was before Hobby and Ellington were under the Class B (then called a TCA) airspace and I wasn't in an area where I needed to talk to them but I still liked to listen in on the frequency. There was some guy who contacted ATC with something like "Houston approach, this is Piper 123 Yo-Yo." Houston approach came back with "Piper 123 Yankee-Yankee, Houston approach, go ahead....." The pilot came back and identified himself as Piper 123 Yo-Yo again and made his request. The controller responded with "now I've heard everything!" and gave the dude a squawk code with heading and altitude instructions. It took me a while to regain my composure. It's probably one of those situations where you really needed to be there but to me, it was funny as hell at the time. Fly Safe, Steve R. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bell Factory tour | jOsHuA | Rotorcraft | 2 | July 21st 06 12:12 PM |
Trying to find the Boeing 737-300 Photo Real Panel for FS98(antique;-) | Heiko Brandstaedter | Simulators | 0 | October 7th 04 02:42 PM |
Pirep: Garmin GPSMAP 296 versus 295. (very long) | Jon Woellhaf | Piloting | 12 | September 4th 04 11:55 PM |
Bell 47 goes down in Muncie, IN | [email protected] | Rotorcraft | 14 | August 17th 04 11:29 PM |
Bell 427 Main Rotor System | Bob M | Rotorcraft | 7 | March 19th 04 01:35 AM |