![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I'd like to add an electronic six probe egt/cht to my bonanza. The
three usual candidates with similar products are Electronics-international, JPI and Insight. Some have better features than others but all do what I need. I don't need to save data for future reference. Dynon and MGL electronics both make LCD monitors for sport/experimental aircraft that accept standard probes. Neither MGL nor Dynon have any FAA approvals. Dynon says that you could get a 337 to install one of their products. The basic MGL TC3 would be fine for my purposes. It's $265.00 plus the probes plus installation. The cheapest approved monitor is around $2000 with probes plus installation. Has anyone gotten a 337 for the installation of any of these products? Would it help if I left my existing single probe EGT and CHT and their associated gauges? I've read that these gauges can be installed in sport aircraft and that these aircraft can be used for flight training. Maybe I read that incorrectly but if that is the case, how could the these products be used in airplanes used for hire but not for a part 91 airplane like most of us fly. Thanks Dave |
#2
|
|||
|
|||
![]()
On Feb 21, 8:57 am, dave wrote:
I'd like to add an electronic six probe egt/cht to my bonanza. The three usual candidates with similar products are Electronics-international, JPI and Insight. There is at least one other source.. Look through Trade-A-Plane.... As far as using non-tso'd forget it, ain't gonna happen... cheers ... denny |
#3
|
|||
|
|||
![]()
As far as using non-tso'd forget it, ain't gonna happen...
That's what I was told, too. We've got the JPI EDM-700 keeping an eye on our 6-cylinder O-540, and love it. It's become an essential tool for us in the four years we've flown with it. -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
#4
|
|||
|
|||
![]()
urposes. It's $265.00 plus the probes plus installation. The
cheapest approved monitor is around $2000 with probes plus installation. Some of these cheap add-ons reduce the resale value of the aircraft, the theory being that the owner has taken other shortcuts. Get one you can rely on; the engine you save will be your own. |
#5
|
|||
|
|||
![]()
On Feb 21, 6:57 am, dave wrote:
Dynon says that you could get a 337 to install one of their products. The basic MGL TC3 would be fine for my purposes. It's $265.00 plus the probes plus installation. The cheapest approved monitor is around $2000 with probes plus installation. Dynon makes a good product. I've installed their stuff in experimental aircraft with excellent results. Getting field approval to get one of these installed in a production plane will be next to impossible. It just isn't done by the FSDOs. I bought a nine probe EI UBG-16 (4 egt, 4cht, 1 oil temp) unit for my Cherokee. It was just over $1200 with probes. Maybe you need to shop around. I got mine from Spruce. As for Light Sport Aircraft, I believe you're right. I've seen quite a few of the non-TSO'd instrument packages in new LSAs. I know the operate under much looser certification standards than normal category planes. John Galban=====N4BQ (PA28-180) |
Thread Tools | |
Display Modes | |
|
|