![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() |
#2
|
|||
|
|||
![]()
Mr. Leonard Millholland in Texas rigged up a plane for such a person a few years
back. He runs an ad for (1/2 VW) and Legal Eagle U/L in Kitplanes,Sport Aviation, etc. mjrhoads wrote: Want to Buy: A used Portable Hand Control (to enable a paraplegic to pilot) for either a Cessna 150/172 or a Piper Cherokee 140/160/180. Please call 503-467-1253 or email |
#3
|
|||
|
|||
![]()
You may have to manufacture something the faa should approve it if its safe!
If they deny it I bet the ACLU would have fun with the FAA if they denied an approval for something you manufactured to make your airplane adaptable to your disability. "Jerry J. Wass" wrote in message ... Mr. Leonard Millholland in Texas rigged up a plane for such a person a few years back. He runs an ad for (1/2 VW) and Legal Eagle U/L in Kitplanes,Sport Aviation, etc. mjrhoads wrote: Want to Buy: A used Portable Hand Control (to enable a paraplegic to pilot) for either a Cessna 150/172 or a Piper Cherokee 140/160/180. Please call 503-467-1253 or email |
#4
|
|||
|
|||
![]() "Jerry J. Wass" wrote in message ... Mr. Leonard Millholland in Texas rigged up a plane for such a person a few years back. He runs an ad for (1/2 VW) and Legal Eagle U/L in Kitplanes,Sport Aviation, etc. A company in Florida is manufacturing sailplane trainers and offers hand rudder controls. By the way, this is perhaps the first time that the manufacture of a certified aircraft has been moved from Europe to the United States. The FAA paperwork involved is awsome! Vaughn mjrhoads wrote: Want to Buy: A used Portable Hand Control (to enable a paraplegic to pilot) for either a Cessna 150/172 or a Piper Cherokee 140/160/180. Please call 503-467-1253 or email |
#5
|
|||
|
|||
![]() "mjrhoads" wrote in message ... Want to Buy: A used Portable Hand Control (to enable a paraplegic to pilot) for either a Cessna 150/172 or a Piper Cherokee 140/160/180. Please call 503-467-1253 or email There is an STC for the Pipers PA-28, PA-28R and PA-32. The Fred Weick Hand Control For Rudder Pedals. STC SA472SO |
#6
|
|||
|
|||
![]() There is an STC for the Pipers PA-28, PA-28R and PA-32. The Fred Weick Hand Control For Rudder Pedals. STC SA472SO Fred also designed the Ercoupe which is available without rudder pedals and a hand brake. |
#7
|
|||
|
|||
![]()
Gary Sipe in Tulsa Oklahoma has a set out of a Cardinal.. He may hadve
STC'd them by now. Sipe Aircraft, 918-298 -8841 "mjrhoads" wrote in message ... Want to Buy: A used Portable Hand Control (to enable a paraplegic to pilot) for either a Cessna 150/172 or a Piper Cherokee 140/160/180. Please call 503-467-1253 or email |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) | Rich Stowell | Aerobatics | 28 | January 2nd 09 02:26 PM |
Diamond DA-40 with G-1000 pirep | C J Campbell | Instrument Flight Rules | 117 | July 22nd 04 05:40 PM |
Pilot Error? Is it Mr. Damron? | Badwater Bill | Home Built | 3 | June 23rd 04 04:05 PM |
definition of "dual controls" | Lee Elson | Instrument Flight Rules | 4 | April 24th 04 02:58 PM |
Single-Seat Accident Records (Was BD-5B) | Ron Wanttaja | Home Built | 41 | November 20th 03 05:39 AM |