![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
ILEC SN10 pilots - ILEC and Dave Nadler are developing
FLARM support for the ILEC SN10. At this time of year, we're not able to test in Germany, so we are looking for pilots to help test the new software who are now flying with FLARM connected to an SN10. Testing will require periodic reload of SN10 software, performing a few checks for us, sending reports of your experience, comments, suggestions, any difficulties, etc... If you'd like to volunteer, please contact: Thanks in advance ! PS: Initial flight tests were completed yesterday in USA, but without other FLARMs around to test screens in flight. PPS: FLARM group is still working on FLARM availability in USA, currently shooting for beginning of 2010. |
#2
|
|||
|
|||
![]()
On Nov 30, 3:32*pm, Dave Nadler wrote:
ILEC SN10 pilots - ILEC and Dave Nadler are developing FLARM support for the ILEC SN10. At this time of year, we're not able to test in Germany, so we are looking for pilots to help test the new software who are now flying with FLARM connected to an SN10. Testing will require periodic reload of SN10 software, performing a few checks for us, sending reports of your experience, comments, suggestions, any difficulties, etc... If you'd like to volunteer, please contact: Thanks in advance ! PS: Initial flight tests were completed yesterday in USA, but without other FLARMs around to test screens in flight. PPS: FLARM group is still working on FLARM availability in USA, currently shooting for beginning of 2010. Dave, If one does not have an SN10 do you know if the FLARM group is also planning to have "stand-alone" units available for use in the USA at the beginning of 2010? Thanks - Renny |
#3
|
|||
|
|||
![]()
On Nov 30, 6:43*pm, Renny wrote:
Dave, If one does not have an SN10 do you know if the FLARM group is also planning to have "stand-alone" units available for use in the USA at the beginning of 2010? Thanks *- Renny FLARM can certainly be used independent of SN10. In addition to FLARM collision avoidance: - It is an IGC logger, optional noise sensor for us motorized types. - A version including transponder-sensing is available shortly. Lets hope its available shortly ! Best Regards, Dave "YO electric" |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
ILEC SN10 release 2.33 available | Dave Nadler | Soaring | 2 | July 24th 09 02:22 PM |
Help Needed from Mac nerd with ILEC SN10 | DRN | Soaring | 5 | August 21st 08 12:13 PM |
Ilec SN10 question | John Ferguson | Soaring | 3 | May 29th 07 05:11 AM |
Updated help for ILEC SN10 pilots with Macs | [email protected] | Soaring | 0 | March 23rd 06 10:36 PM |
FS - ILEC SN10 and Volkslogger | Dave Springford | Soaring | 0 | March 7th 05 12:43 AM |