Trailer

Does anyone know where to get a replament Hydraulic jack for lifting the
glider on its trolley.

On Jul 19, 8:19*am, Roy Dell wrote:
Does anyone know where to get a replament Hydraulic jack for lifting the
glider on its trolley. *

Replacement for jack on Cobra trailers is "Big Red" 2 ton jack that
can be gotten from Auto Zone, Advance Auto, or Tractor supply.
Made in Taiwan just like original.
Thanks to Gregg Leslie for this tip.
UH

On Jul 19, 5:41*am, wrote:
On Jul 19, 8:19*am, Roy Dell wrote:

Does anyone know where to get a replament Hydraulic jack for lifting the
glider on its trolley. *

Replacement for jack on Cobra trailers *is *"Big Red" 2 ton jack that
can be gotten from Auto Zone, Advance Auto, or Tractor supply.
Made in Taiwan just like original.
Thanks to Gregg Leslie for this tip.
UH

From what I have seen the jack does not appear to be the same as my
Cobra jack. Could you provide a part number?

http://www.tractorsupply.com/jacks/b...e-jack-0116607

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_2-Ton-Hydraulic-Bottle-Jack-Torin_9040072-P_N3395_T|GRP2042_____

On Jul 20, 9:11*am, Mario wrote:
On Jul 19, 5:41*am, wrote:

On Jul 19, 8:19*am, Roy Dell wrote:

Does anyone know where to get a replament Hydraulic jack for lifting the
glider on its trolley. *

Replacement for jack on Cobra trailers *is *"Big Red" 2 ton jack that
can be gotten from Auto Zone, Advance Auto, or Tractor supply.
Made in Taiwan just like original.
Thanks to Gregg Leslie for this tip.
UH

From what I have seen the jack does not appear to be the same as my
Cobra jack. Could you provide a part number?

http://www.tractorsupply.com/jacks/b...e-jack-0116607

http://shop.advanceautoparts.com/web.....GRP2042_____

You need to look at the floor jacks. You will be taking one of those
apart for the hydraulic jack inside.
I think it depends on each ramp design as there are variations from my
understanding, but for my particular case, the length was critical.
The jack itself needed to be short enough so that when it collapsed, a
portion of the scissors did not bind/hit the top of the jack.
While I didnt find an exact drop in replacement, I found the Craftsman
2 1/4 jack worked well enough for me and is currently in place and
working just fine.

On Jul 20, 12:11*pm, Mario wrote:
On Jul 19, 5:41*am, wrote:

On Jul 19, 8:19*am, Roy Dell wrote:

Does anyone know where to get a replament Hydraulic jack for lifting the
glider on its trolley. *

Replacement for jack on Cobra trailers *is *"Big Red" 2 ton jack that
can be gotten from Auto Zone, Advance Auto, or Tractor supply.
Made in Taiwan just like original.
Thanks to Gregg Leslie for this tip.
UH

From what I have seen the jack does not appear to be the same as my
Cobra jack. Could you provide a part number?

http://www.tractorsupply.com/jacks/b...e-jack-0116607

http://shop.advanceautoparts.com/web.....GRP2042_____

Part number in photo is T 82002
UH

On Jul 19, 6:19*am, Roy Dell wrote:
Does anyone know where to get a replament Hydraulic jack for lifting the
glider on its trolley. *

Roy,
If you are looking for Cobra trailer parts, Williams Soaring carries
an extensive inventory.
Thx - Renny