![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I've just bought a '62 Cessna 172 with the Horton STOL kit and madras
droop tips and have a question: My dad took it up for the first time (it's in WI, I'm in NC) and was curious about if these modifications change the "V" speeds in any significant way...? Apparantly there is no change in the POH after these modifications, but obviously there must be some difference. Specifically how Vx and Vy would be different, best glide, and what to approach at. He and the instructor were using 75-80 as the approach speed (which seemed high to me). Does the sink rate increase noticably with these modifications? Thanks for any insight! Ryan Wubben Chapel Hill, NC |
#2
|
|||
|
|||
![]()
Any change in V speeds should be noted in the supplemental type certificate
that comes with the mod. The STC should also describe any other changes in flight characteristics. |
#4
|
|||
|
|||
![]()
Ryan,
There is no POH for your airplane. The Owner's Manual has V speeds. However, you MUST have the STC paperwork for the airplane for it to be legal to fly. Look at the STC paperwork for any information on speeds. All the best, Rick (R. Wubben) wrote in message . com... I've just bought a '62 Cessna 172 with the Horton STOL kit and madras droop tips and have a question: My dad took it up for the first time (it's in WI, I'm in NC) and was curious about if these modifications change the "V" speeds in any significant way...? Apparantly there is no change in the POH after these modifications, but obviously there must be some difference. Specifically how Vx and Vy would be different, best glide, and what to approach at. He and the instructor were using 75-80 as the approach speed (which seemed high to me). Does the sink rate increase noticably with these modifications? Thanks for any insight! Ryan Wubben Chapel Hill, NC |
#5
|
|||
|
|||
![]()
That was my understanding...
My dad and the instructor went thru the paperwork and the POH and found no mention of any change in the speeds. The instructor has experience in a 180 hp 172 with the Horton kit and remembered that they purposely did not change the "V" speeds. But from a practical stand point, do they change...? Thanks, Ryan Wubben Chapel Hill, NC |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Horton STOL 172 "V" speeds | R. Wubben | Owning | 6 | December 30th 03 02:04 AM |
QUESTION ON BUSH STOL KIT | Richard Jimenez | Owning | 0 | September 15th 03 09:20 PM |
QUESTION ON BUSH STOL KIT | Richard Jimenez | Aviation Marketplace | 0 | September 11th 03 10:28 PM |
QUESTION ON BUSH STOL KIT | Richard Jimenez | Owning | 0 | September 10th 03 04:06 PM |
Question on Bush STOL kit | MikeM | Owning | 0 | September 7th 03 03:54 AM |