LX9070 settings

I have a LX9070 and noticed that when I chose the glider ASG-29E polar, the wing area is listed as 34 sqft and wing loading 2.2 lb/sqft. When I adjust the proper wing area save it and go back to check the data it has reverted to 34 sqft wing area. These should be per-programed polar data. How do I get the correct input?
Thank you

On Tuesday, 17 May 2016 16:04:46 UTC+2, Jonathan St. Cloud wrote:
I have a LX9070 and noticed that when I chose the glider ASG-29E polar, the wing area is listed as 34 sqft and wing loading 2.2 lb/sqft. When I adjust the proper wing area save it and go back to check the data it has reverted to 34 sqft wing area. These should be per-programed polar data. How do I get the correct input?
Thank you

Have you asked LXNav for assistance?
They usually respond within a day or two.

This is a real stab in the dark but did you try renaming the glider?
Maybe the code keeps loading the default pre-loaded polar for your glider because the names match and by changing the glider name to something else it will save your settings to a different internal "glider profile"?