![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I'm getting that tired, impatient feeling I get when I hear one of our technical folks say "it SHOULD work" or "THAT shouldn't happen" or "works on MY machine/browser" or "never seen that before."
I'm trying to get an XCSoar map file for Nephi. XCSoar's site insists I'm using IE even though I'm using Chrome, although it appears (using a mobile device) that the file I need isn't there. I tried using XCSoar's Map Generation site but my map has been stalled in the "Queued" status for several hours, with a cryptic "refresh" button being the only other thing on the page. Maybe I'll have an email when I wake up tomorrow as a reward for the two hours I've got invested so far in this. I've installed Top Hat but I haven't removed my faithful Glide Navigator II/Compaq 1550 yet. It's looking better all the time. Suggestions? Guess I should have entered the Club Class at Wurtsboro, instead. I've got a map file for this area. Chip Bearden |
#2
|
|||
|
|||
![]()
You are gonna spend about five thousand bucks to fly that nationals in a glider worth fifty, and you're here complaining about support for free software built 100% with the efforts of unpaid volunteers. Right.
btw, I shared your frustration with XCS, so I pursued different solutions. Some of the commercial solutions work a lot better for nationals caliber racing than XCSoar. best, Evan (who by way of disclosure moonlights with ClearNav Inc) |
#3
|
|||
|
|||
![]()
On Sunday, June 12, 2016 at 8:24:50 AM UTC-4, Tango Eight wrote:
You are gonna spend about five thousand bucks to fly that nationals in a glider worth fifty, and you're here complaining about support for free software built 100% with the efforts of unpaid volunteers. Right. btw, I shared your frustration with XCS, so I pursued different solutions. Some of the commercial solutions work a lot better for nationals caliber racing than XCSoar. best, Evan (who by way of disclosure moonlights with ClearNav Inc) I hear you, too. ![]() Full disclosure, this morning the page announced my file was ready to download, and I did. Haven't viewed it yet but...it SHOULD work. ![]() I've actually been pretty impressed with Top Hat so far. It's the little things (e.g., setting up the hardware with a tangle of cables and wiring) that took some time. And getting a map for the contest. OK, not so little. What's amazing to me is that, seriously, GNII still does most of what I want to do. But there's always something better. Apologies to the volunteers who invest their time in things like XCSoar and Top Hat. I'm not sure why you do it, but assuming I can work out the kinks, I'm excited about the results. I'd love to have a ClearNav. I decided to try the budget route first. Chip Bearden |
#4
|
|||
|
|||
![]()
Or, you could go to the XCSoar file manager (config 1/3 - config 2/3 - file manager), click Add, and select the US_UTAH_R9N_HighRes.xcm scenery file and let XCSoar download and install the map fil for you automatically.
Robert On Saturday, June 11, 2016 at 11:56:01 PM UTC-5, wrote: I'm getting that tired, impatient feeling I get when I hear one of our technical folks say "it SHOULD work" or "THAT shouldn't happen" or "works on MY machine/browser" or "never seen that before." I'm trying to get an XCSoar map file for Nephi. XCSoar's site insists I'm using IE even though I'm using Chrome, although it appears (using a mobile device) that the file I need isn't there. I tried using XCSoar's Map Generation site but my map has been stalled in the "Queued" status for several hours, with a cryptic "refresh" button being the only other thing on the page. Maybe I'll have an email when I wake up tomorrow as a reward for the two hours I've got invested so far in this. I've installed Top Hat but I haven't removed my faithful Glide Navigator II/Compaq 1550 yet. It's looking better all the time. Suggestions? Guess I should have entered the Club Class at Wurtsboro, instead. I've got a map file for this area. Chip Bearden |
#5
|
|||
|
|||
![]()
Chip - I've put a ZIP on my server with all the files you need, including:
- latest FLARMnet file - map data - contest turnpoints and airports - contest airspace See you shortly in Nephi!! Best Regards, Dave http://www.nadler.com/backups/NephiContestFiles.zip |
#6
|
|||
|
|||
![]()
Or you can download that file he http://xcsoar-mapgen.sigkill.ch/maps/
and put it in the folder "XCSoarData" on your SD card and tell Tophat (from its configuration menu) to use that file. |
#7
|
|||
|
|||
![]()
On Sunday, June 12, 2016 at 9:28:43 AM UTC-4, wrote:
Or, you could go to the XCSoar file manager (config 1/3 - config 2/3 - file manager), click Add, and select the US_UTAH_R9N_HighRes.xcm scenery file and let XCSoar download and install the map fil for you automatically. Robert On Saturday, June 11, 2016 at 11:56:01 PM UTC-5, wrote: I'm getting that tired, impatient feeling I get when I hear one of our technical folks say "it SHOULD work" or "THAT shouldn't happen" or "works on MY machine/browser" or "never seen that before." I'm trying to get an XCSoar map file for Nephi. XCSoar's site insists I'm using IE even though I'm using Chrome, although it appears (using a mobile device) that the file I need isn't there. I tried using XCSoar's Map Generation site but my map has been stalled in the "Queued" status for several hours, with a cryptic "refresh" button being the only other thing on the page. Maybe I'll have an email when I wake up tomorrow as a reward for the two hours I've got invested so far in this.. I've installed Top Hat but I haven't removed my faithful Glide Navigator II/Compaq 1550 yet. It's looking better all the time. Suggestions? Guess I should have entered the Club Class at Wurtsboro, instead. I've got a map file for this area. Chip Bearden I downloaded the US_UTAH_R9N_HighRes.xcm file last night but the scenery stopped just south of Salt Lake...which doesn't do it for Nephi. Perhaps the download was corrupted. In any case, MY requested file was available this morning so as soon as I get cleaned up from flying today, I'll take a look. BTW, I used Top Hat for the first time today and am happy with my decision. If the new file works, all my troubles are over. Right! ![]() Chip Bearden |
#8
|
|||
|
|||
![]()
On Sunday, June 12, 2016 at 4:45:42 PM UTC-7, wrote:
On Sunday, June 12, 2016 at 9:28:43 AM UTC-4, wrote: Or, you could go to the XCSoar file manager (config 1/3 - config 2/3 - file manager), click Add, and select the US_UTAH_R9N_HighRes.xcm scenery file and let XCSoar download and install the map fil for you automatically. Robert On Saturday, June 11, 2016 at 11:56:01 PM UTC-5, wrote: I'm getting that tired, impatient feeling I get when I hear one of our technical folks say "it SHOULD work" or "THAT shouldn't happen" or "works on MY machine/browser" or "never seen that before." I'm trying to get an XCSoar map file for Nephi. XCSoar's site insists I'm using IE even though I'm using Chrome, although it appears (using a mobile device) that the file I need isn't there. I tried using XCSoar's Map Generation site but my map has been stalled in the "Queued" status for several hours, with a cryptic "refresh" button being the only other thing on the page. Maybe I'll have an email when I wake up tomorrow as a reward for the two hours I've got invested so far in this. I've installed Top Hat but I haven't removed my faithful Glide Navigator II/Compaq 1550 yet. It's looking better all the time. Suggestions? Guess I should have entered the Club Class at Wurtsboro, instead. I've got a map file for this area. Chip Bearden I downloaded the US_UTAH_R9N_HighRes.xcm file last night but the scenery stopped just south of Salt Lake...which doesn't do it for Nephi. Perhaps the download was corrupted. In any case, MY requested file was available this morning so as soon as I get cleaned up from flying today, I'll take a look.. BTW, I used Top Hat for the first time today and am happy with my decision. If the new file works, all my troubles are over. Right! ![]() Chip Bearden Top Hat... Is that the Fred Astaire version? Jim |
#9
|
|||
|
|||
![]()
TopHat is a derivative of XCSoar, somewhat simplified / streamlined. I use it on a Nook e-reader and love it. (Thank you Robert Dunning!) The Nook's high-contrast e-ink display is easily visible in sunlight, and it is large, meaning easy viewing and finger tapping (of the non-rhythmic kind). It does take some baby-ing to make sure it works right: fully charge the Nook before flying, don't let it overheat in the sun, be careful not to break the micro-USB connector (speaking from experience :-), and so forth. I use it with a USB GPS "puck", an OTG Y cable, and a 12V-5V converter.
|
#10
|
|||
|
|||
![]()
Hi, model do you use? I currently use Nexus 7, I am very happy with it, but would not mind something lighter.
Thanks Paul |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Going to Nephi? | Paul Remde | Soaring | 6 | June 26th 15 05:22 AM |
Old XCSoar DAT file format | bds | Soaring | 7 | March 31st 15 05:41 PM |
Help adding a 2nd waypoint file in XCSoar | Vsoars | Soaring | 0 | June 22nd 14 09:35 PM |
New Video From Nephi and Update on 2014 Nephi Events | [email protected] | Soaring | 1 | June 5th 14 03:27 AM |
[Xcsoar-user] Terrain and waypoint file generation | Ed Winchester[_2_] | Soaring | 0 | May 3rd 09 02:34 PM |