![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I am looking at gliders for sale in france and babelfish translates "avec
volets" as "with shutters" I presume it actually means "with extentions" can someone confirm or correct me. |
#2
|
|||
|
|||
![]()
"Avec volets" means "with flaps"
Cheers, Charles |
#3
|
|||
|
|||
![]()
In article , Stefan
writes volets are flaps Then the language has changed a bit. In 1958 they were spoilers. -- Mike Lindsay |
#4
|
|||
|
|||
![]()
On Mon, 8 Sep 2003 16:25:40 +0100, Mike Lindsay
wrote: In article , Stefan writes volets are flaps Then the language has changed a bit. In 1958 they were spoilers. IIRC I think they can be any movable control surface. I'm pretty certain I've seen the term used to refer to a rudder in that excellent modelling periodical, Vol Libre. -- martin@ : Martin Gregorie gregorie : Harlow, UK demon : co : Zappa fan & glider pilot uk : |
#5
|
|||
|
|||
![]()
I doubt it:
Volets = Flaps Ailerons = Ailerons Gouvernail = Rudder Profondeur = Elevators Aerofreins = Air brakes/Spoilers and this for many, many years "Martin Gregorie" wrote in message ... On Mon, 8 Sep 2003 16:25:40 +0100, Mike Lindsay wrote: In article , Stefan writes volets are flaps Then the language has changed a bit. In 1958 they were spoilers. IIRC I think they can be any movable control surface. I'm pretty certain I've seen the term used to refer to a rudder in that excellent modelling periodical, Vol Libre. -- martin@ : Martin Gregorie gregorie : Harlow, UK demon : co : Zappa fan & glider pilot uk : |
#6
|
|||
|
|||
![]()
Must be a context thing. None of my French aerodynamics books for real
aircraft use the terms 'volet de derive' or 'volet commande'. Trimtabs can be 'tab', 'flettner' or 'compensateur' and, for completeness, slats are 'ailes a becs'. These are terms that have been in use for years. Of course the Academie Francaise has a hair up its nose about purifying the language of foreign influences and have maybe invented some terms of their own; but if this is the case, no real aviators use them. "Martin Gregorie" wrote in message ... On Tue, 9 Sep 2003 07:43:40 +0200, "Simon Waddell" wrote: I doubt it: Volets = Flaps Ailerons = Ailerons Gouvernail = Rudder Profondeur = Elevators Aerofreins = Air brakes/Spoilers and this for many, many years I've never seen 'gouvernail' used in Vol Libre, but the term I have seen used several times is 'volet de derrive' or 'volet commande'. These refer to a rudder used as a (multi-position) fixed stop trimming device in a free flight model. Vol Libre is a French publication edited and printed in Strasbourg. Does the context (model, free flight) make a difference? "Martin Gregorie" wrote in message .. . On Mon, 8 Sep 2003 16:25:40 +0100, Mike Lindsay wrote: In article , Stefan writes volets are flaps Then the language has changed a bit. In 1958 they were spoilers. IIRC I think they can be any movable control surface. I'm pretty certain I've seen the term used to refer to a rudder in that excellent modelling periodical, Vol Libre. -- martin@ : Martin Gregorie gregorie : Harlow, UK demon : co : Zappa fan & glider pilot uk : -- martin@ : Martin Gregorie gregorie : Harlow, UK demon : co : Zappa fan & glider pilot uk : |
#7
|
|||
|
|||
![]()
Simon's translations are correct. "Vol Libre" has not very much to do with
soaring or terminology used in soaring. -- Bert Willing ASW20 "TW" "Martin Gregorie" a écrit dans le message de ... On Tue, 9 Sep 2003 07:43:40 +0200, "Simon Waddell" wrote: I doubt it: Volets = Flaps Ailerons = Ailerons Gouvernail = Rudder Profondeur = Elevators Aerofreins = Air brakes/Spoilers and this for many, many years I've never seen 'gouvernail' used in Vol Libre, but the term I have seen used several times is 'volet de derrive' or 'volet commande'. These refer to a rudder used as a (multi-position) fixed stop trimming device in a free flight model. Vol Libre is a French publication edited and printed in Strasbourg. Does the context (model, free flight) make a difference? "Martin Gregorie" wrote in message .. . On Mon, 8 Sep 2003 16:25:40 +0100, Mike Lindsay wrote: In article , Stefan writes volets are flaps Then the language has changed a bit. In 1958 they were spoilers. IIRC I think they can be any movable control surface. I'm pretty certain I've seen the term used to refer to a rudder in that excellent modelling periodical, Vol Libre. -- martin@ : Martin Gregorie gregorie : Harlow, UK demon : co : Zappa fan & glider pilot uk : -- martin@ : Martin Gregorie gregorie : Harlow, UK demon : co : Zappa fan & glider pilot uk : |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why was the Fokker D VII A Good Plane? | Matthew G. Saroff | Military Aviation | 111 | May 4th 04 05:34 PM |