![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Trying to strip the paint from an old Cherokee. What a mess. Anyone have
recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete |
#2
|
|||
|
|||
![]() "PETER H. OUELLETTE" wrote in message ... Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete Known in California to cause cancer, but methylene chloride in a gelatinous base is the only way I know to really get it off. Don't breathe the vapors or get it on your skin. |
#3
|
|||
|
|||
![]()
I found this product on the web and it's not toxic
http://www.m-tc.com/efs2500_home.htm "PETER H. OUELLETTE" wrote in message ... Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete |
#4
|
|||
|
|||
![]()
"PETER H. OUELLETTE" wrote in message ...
Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete DBX from K&E Chemical. This is a biodegradable stripper. Smells good and not as dangerous as methylene chloride strippers. I have also used Kleen Strip Aircraft paint remover (in the Blue can) and it works very well. Burns like crazy if you get it on you. Bix makes a good stripper also. Remember, keep stripper off any plastic or plexi-glass. |
#5
|
|||
|
|||
![]()
StazWet from remdam.com
PETER H. OUELLETTE wrote: Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete |
#6
|
|||
|
|||
![]()
Why don't you try a soda blaster, they're getting more popular all the time.
"PETER H. OUELLETTE" wrote: Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete |
#7
|
|||
|
|||
![]()
"PETER H. OUELLETTE" wrote in message ...
Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete We use Napier International Technologies' SV-35PMA spraying grade stripper. This stuff is non-toxic, non-odorous and biodegradable. Spray it on with an airless paint sprayer, let it sit for several hours, and blast it off with a pressure washer. It's the best stripper we've ever used, and its only drawback is the slowness. It's faster if put out in the heat of the sun. If you catch the runoff and let the water dry out of it, the residue goes in the garbage. Boeing recommends it, and a major heavy aircraft overhauler in BC uses a lot of it. Napier is in Langley, BC, Canada, and can be reached at 1-800-564-9929. Dan |
#8
|
|||
|
|||
![]()
Where can you get this in the USA?
"Dan Thomas" wrote in message m... "PETER H. OUELLETTE" wrote in message ... Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete We use Napier International Technologies' SV-35PMA spraying grade stripper. This stuff is non-toxic, non-odorous and biodegradable. Spray it on with an airless paint sprayer, let it sit for several hours, and blast it off with a pressure washer. It's the best stripper we've ever used, and its only drawback is the slowness. It's faster if put out in the heat of the sun. If you catch the runoff and let the water dry out of it, the residue goes in the garbage. Boeing recommends it, and a major heavy aircraft overhauler in BC uses a lot of it. Napier is in Langley, BC, Canada, and can be reached at 1-800-564-9929. Dan |
#9
|
|||
|
|||
![]()
Using Google and entering SV-35PMA in the search engine I
get: RemovALL Distributors: Boston Restoration - call 1-978-988-1177- will take phone orders or order online at www.restorationproducts.com iCAG - call 1-866-873-4224- will take phone orders or check their website at www.icaginc.com GMG Distributor (Northern California)- call 1-800-468-4420 or click here for a list of their dealers Blish Mize Paint Sundries (Central States) call 1-800-444-7474 for a list of their dealers Lancaster (Central and Eastern states)- call 1- 864-583-3011 or click here for a list of their dealers Tri-W (Central and Western states, except California)- call at 1-800-366-8749 Dealers: ABC Equipment Rental, Inc. - call 918-744-8353 or 2910 East 15th Street, Tulsa, OK On Sat, 27 Nov 2004 14:32:52 -0500, "pete" wrote: Where can you get this in the USA? "Dan Thomas" wrote in message om... "PETER H. OUELLETTE" wrote in message ... Trying to strip the paint from an old Cherokee. What a mess. Anyone have recommendations on a good paint stripper? The old paint is lacquer, I'm told... Pete We use Napier International Technologies' SV-35PMA spraying grade stripper. This stuff is non-toxic, non-odorous and biodegradable. Spray it on with an airless paint sprayer, let it sit for several hours, and blast it off with a pressure washer. It's the best stripper we've ever used, and its only drawback is the slowness. It's faster if put out in the heat of the sun. If you catch the runoff and let the water dry out of it, the residue goes in the garbage. Boeing recommends it, and a major heavy aircraft overhauler in BC uses a lot of it. Napier is in Langley, BC, Canada, and can be reached at 1-800-564-9929. Dan |
#10
|
|||
|
|||
![]()
"pete" wrote in message
... Where can you get this in the USA? We purchased 10 gallons from Aircraft Spruce. Deb -- 1946 Luscombe 8A (His) 1948 Luscombe 8E (Hers) 1954 Cessna 195B, restoring (Ours) Jasper, Ga. (JZP) |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
One coat paint for aluminum? | [email protected] | Home Built | 10 | September 17th 04 07:01 AM |
Need Paint Booth Info | Tom Haughton | Home Built | 1 | December 7th 03 09:58 PM |
Choice of Paint for use over Copper foil Antennas | Charlie Precourt | Home Built | 1 | December 2nd 03 02:51 AM |
rivet and dimple paint prep | Dick | Home Built | 2 | August 12th 03 08:31 AM |
Velocity Paint scheme | Ezaviator | Home Built | 0 | July 31st 03 04:09 AM |