A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Annual and rib replacement complete



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old May 6th 06, 05:54 AM posted to rec.aviation.owning
external usenet poster
 
Posts: n/a
Default Annual and rib replacement complete

After a long 6.5 weeks in the shop for the annual and replacing two
cracked ribs, yesterday was the day for the test flight. It was my
first time being a test pilot and I recall reading several posts about
first flights following an annual so I took a long time during the
preflight. Add in the fact that we had some not so minor airframe
repair and I spent a lot of time on my back looking at every cotter pin
and safety wire of the landing gear, every nut and bolt of the flaps,
and made darn sure the control surfaces moved the right direction. I'd
seen the plane with the main gear, flaps, and gas tanks removed during
the rib repair...a sad sight for sure. I wanted to satisfy myself that
it all looked and felt right. Not that I doubt the shop's work.
Through this ordeal, I've spent several hours poking around the plane
and talking to the A&P. Since it was my butt doing the test flight,
however, I wanted to take my time.

The test flight was a non event...just the way it should be. Sure felt
good when I lowered the gear and saw three in the green. 04T flew just
as before. Slight left wing heavy situation still existed and has since
been taken care of. I spent maybe 1/2 hour orbiting the airport at 5500
ft checking the gear, flaps and the rigging.

Now the fun part...how much this little adventure cost. Let's just say,
it sure is nice to be able to divide the costs by three.

Annual inspection: .95 AMU
Rib repair: 5.4 AMUs (60 hours labor, approx. 1.2 AMUs in parts)
GNS 430 AD compliance: .75 AMU (AD repair was free but required hardware
and software upgrades from Garmin)
Everything else: .9 AMU. Includes new points, brake linings,
oil/filter, air filter, labor, Piper SB 1156 for the nose gear drag link
bolt, and other stuff I'm forgetting.

Grand total: 8.00833 AMUs. Like I said, nice to divide by three :-)

We were planning to get our 13 month out of the annual with a April 1st
sign off...but that all changed with the cracked ribs.

The rib repair could have easily cost another 1 AMU in labor based on
actual vs. charged labor hours. In essence, the shop didn't charge us
for their learning curve.

Can't wait to get back into a regular flying routine. Those first few
instrument approaches should be a hoot seeing as a mere five flights ago
was my check ride.

--
Jack Allison
PP-ASEL-Instrument Airplane
Arrow N2104T

"When once you have tasted flight, you will forever walk the Earth
with your eyes turned skyward, for there you have been, and there
you will always long to return"
- Leonardo Da Vinci

(Remove the obvious from address to reply via e-mail)
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:00 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.