A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Stupid hp to thrust question



 
 
Thread Tools Display Modes
  #1  
Old December 5th 03, 01:24 AM
Mark
external usenet poster
 
Posts: n/a
Default Stupid hp to thrust question

Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than a
prop spinning 2300 rpm on a 100 hp motor ?



  #2  
Old December 5th 03, 01:49 AM
RR Urban
external usenet poster
 
Posts: n/a
Default

On Thu, 4 Dec 2003 20:24:00 -0500, "Mark" wrote:

Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than a
prop spinning 2300 rpm on a 100 hp motor ?

+++++++++++++++++++++

Theoretically speaking -

If the props are identical....
so is the thrust on the test stand.


Barnyard BOb --
If I'm wrong, never mind.
  #3  
Old December 5th 03, 01:51 AM
Stu Fields
external usenet poster
 
Posts: n/a
Default

Assuming both engines are producing the same torque at that rpm, then yes.
Torque x RPM = horsepower. Note: the props will not be both the same
diameter and pitch.
Stu Fields
"RR Urban" wrote in message
...
On Thu, 4 Dec 2003 20:24:00 -0500, "Mark" wrote:

Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than

a
prop spinning 2300 rpm on a 100 hp motor ?

+++++++++++++++++++++

Theoretically speaking -

If the props are identical....
so is the thrust on the test stand.


Barnyard BOb --
If I'm wrong, never mind.



  #4  
Old December 8th 03, 05:10 PM
nafod40
external usenet poster
 
Posts: n/a
Default

RR Urban wrote:
On Thu, 4 Dec 2003 20:24:00 -0500, "Mark" wrote:


Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than a
prop spinning 2300 rpm on a 100 hp motor ?


To paraphrase the question...

If I put 150 lbs of crap in a 100 lb bag, and 150 lbs of crap in a 150
lb bag, which bag is holding more crap?

  #5  
Old December 8th 03, 07:32 PM
Russell Kent
external usenet poster
 
Posts: n/a
Default

nafod40 wrote:

RR Urban wrote:
On Thu, 4 Dec 2003 20:24:00 -0500, "Mark" wrote:


Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than a
prop spinning 2300 rpm on a 100 hp motor ?


To paraphrase the question...

If I put 150 lbs of crap in a 100 lb bag, and 150 lbs of crap in a 150
lb bag, which bag is holding more crap?


OOooooooo..... *SO* close, and yet just off. I think you meant to say:
"If I put 100 lbs of crap in a 100 lb bag, and 100 lbs of crap in a 150 lb bag,
which bag holds more crap?"

Russell Kent

  #6  
Old December 8th 03, 08:29 PM
Rich S.
external usenet poster
 
Posts: n/a
Default

"Russell Kent" wrote in message
...
nafod40 wrote:

OOooooooo..... *SO* close, and yet just off. I think you meant to say:
"If I put 100 lbs of crap in a 100 lb bag, and 100 lbs of crap in a 150 lb

bag,
which bag holds more crap?"


That's an easy one - A 150 lb (capacity) bag holds more crap than a 100 lb
(capacity) bag.

I think YOU meant to say, "If I put 100 lbs of crap in a 100 lb bag, and 100
lbs of crap in a 150 lb bag, Which bag contains more crap?"

Rich "150 lbs of crap in a 100 lb bag is known as a 'Blivet'". S.


  #7  
Old December 8th 03, 09:25 PM
Russell Kent
external usenet poster
 
Posts: n/a
Default

"Rich S." wrote:

"Russell Kent" wrote in message
...
nafod40 wrote:

OOooooooo..... *SO* close, and yet just off. I think you meant to say:
"If I put 100 lbs of crap in a 100 lb bag, and 100 lbs of crap in a 150 lb

bag,
which bag holds more crap?"


That's an easy one - A 150 lb (capacity) bag holds more crap than a 100 lb
(capacity) bag.

I think YOU meant to say, "If I put 100 lbs of crap in a 100 lb bag, and 100
lbs of crap in a 150 lb bag, Which bag contains more crap?"

Rich "150 lbs of crap in a 100 lb bag is known as a 'Blivet'". S.


Not so fast. If my eyes aren't deceiving me, the only change you made was
"contains" for "holds". English being an exceptionally slippery language, it
seems to me that those terms are synonymous. Makes it rather hard to give a
definitive answer to the original poster's question if we aren't clear on
whether "hold/contains" means "at the moment" or "at maximum capacity", which I
believe is the issue that nafod40 was attempting to illustrate with his
posting. I was only trying to show that nafod40's choice of numbers weren't
quite parallel to the original poster's question.

BTW, there's entirely too much crap in here. :-)

ob. aviation content: My Dad used to drop blivets from the B-52 he flew. :-)

Russell Kent

  #8  
Old December 9th 03, 01:39 PM
nafod40
external usenet poster
 
Posts: n/a
Default

Russell Kent wrote:
nafod40 wrote:


RR Urban wrote:

On Thu, 4 Dec 2003 20:24:00 -0500, "Mark" wrote:



Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than a
prop spinning 2300 rpm on a 100 hp motor ?

To paraphrase the question...

If I put 150 lbs of crap in a 100 lb bag, and 150 lbs of crap in a 150
lb bag, which bag is holding more crap?



OOooooooo..... *SO* close, and yet just off. I think you meant to say:
"If I put 100 lbs of crap in a 100 lb bag, and 100 lbs of crap in a 150 lb bag,
which bag holds more crap?"


My language was carefully chosen with the utmost attention to detail. To
paraphrase Humpty-Dumpty...

"When I use a phrase," Humpty Dumpty said, in rather a scornful tone,
"it means just what I choose it to mean—neither more nor less."

"The question is, " said Alice, "whether you can make words mean so many
different things."

"The question is," said Humpty Dumpty. "which is to be master—that's all."

  #9  
Old December 8th 03, 08:56 PM
RobertR237
external usenet poster
 
Posts: n/a
Default

In article , nafod40
writes:


Does a prop turning at 2300 rpm on a 150hp motor produce more thrust than a
prop spinning 2300 rpm on a 100 hp motor ?


To paraphrase the question...

If I put 150 lbs of crap in a 100 lb bag, and 150 lbs of crap in a 150
lb bag, which bag is holding more crap?



Damn BOb, you sure are full of CRAP! ;-)))))

Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)

  #10  
Old December 8th 03, 09:28 PM
Russell Kent
external usenet poster
 
Posts: n/a
Default

Bob Reed wrote:

Damn BOb, you sure are full of CRAP! ;-)))))


I'm sure NO ONE here, not even the crotchety old fool himself, will deny that BOb
is full of crap (sometimes), *BUT* it was nafod40 whom you (Bob Reed) quoted and
not BOb.

Russell Kent

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stupid super cub question Robert Loer Home Built 9 November 22nd 03 05:28 PM
Tecumseh Engine Mounting Question jlauer Home Built 7 November 16th 03 01:51 AM
question about EZRocket David O Home Built 6 October 1st 03 06:03 PM
Question on Pulsejets/Ramjets??? DarylG1532 Home Built 3 August 16th 03 03:20 AM
Question - Regarding Canard Pushers... Tilt Home Built 33 August 10th 03 11:07 AM


All times are GMT +1. The time now is 01:53 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.