![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Why have dual axles when a single axle will do the job.
Is this a need for heavy two placed sailplanes? I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. Dual axles seem to be relatively popular in the UK. Someone out there must have some explanation. GA |
#2
|
|||
|
|||
![]()
On Nov 2, 2:52*pm, glider wrote:
*Why have dual axles when a single axle will do the job. *Is this a need for heavy two placed sailplanes? *I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. *Dual axles seem to be relatively popular in the UK. *Someone out there must have some explanation. *GA This was discussed June 17-19 this year under the topic "ASK-21 in Cobra trailer single or double axle?". My reply follows: 1 axle is better IMHO because: You don't need 2 axles for load bearing 2 axles = 2x the tires to worry about 2 axle rigs tend to push the tow vehicle around a bit more and can have funky ride dynamics - especially for small vehicles - at least in my antiquated experience 2 axle rigs are a bit tougher to push around by hand You generally have to pay for a second axle The only consideration I can imagine is for extremely heavy gliders (check the tire load limits) or potentially to keep from getting stuck in very soft fields. Neither is a sufficient reason to justify all the negatives. In the US they were briefly popular in the late 70's/ early 80's but quickly fell out of favor. You see almost none shipped this way today. 9B |
#3
|
|||
|
|||
![]()
Andy wrote:
On Nov 2, 2:52 pm, glider wrote: Why have dual axles when a single axle will do the job. Is this a need for heavy two placed sailplanes? I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. Dual axles seem to be relatively popular in the UK. Someone out there must have some explanation. GA This was discussed June 17-19 this year under the topic "ASK-21 in Cobra trailer single or double axle?". My reply follows: 1 axle is better IMHO because: You don't need 2 axles for load bearing 2 axles = 2x the tires to worry about 2 axle rigs tend to push the tow vehicle around a bit more and can have funky ride dynamics - especially for small vehicles - at least in my antiquated experience 2 axle rigs are a bit tougher to push around by hand You generally have to pay for a second axle The only consideration I can imagine is for extremely heavy gliders (check the tire load limits) or potentially to keep from getting stuck in very soft fields. Neither is a sufficient reason to justify all the negatives. In the US they were briefly popular in the late 70's/ early 80's but quickly fell out of favor. You see almost none shipped this way today. The conventional wisdom in the USA is dual axle trailers are more stable than equivalent single axle trailer for. They are not popular for the reasons listed, and the tow vehicles popular in the USA are large enough the extra stability doesn't have a high value. In the UK and other places with typically smaller tow vehicles, I'd expect dual axle trailers to be more popular, as GA observes. Another reason that might apply in the USA, is most large gliders (open class or two seaters) are normally left assembled and rarely trailered, and the owner may have decide to just drive slower the few times he trailers the glider instead of putting up with other problems. -- Eric Greenwell - Washington State, USA * Change "netto" to "net" to email me directly * "A Guide to Self-launching Sailplane Operation" at www.motorglider.org |
#4
|
|||
|
|||
![]()
On 2 Nov, 23:05, Andy wrote:
On Nov 2, 2:52*pm, glider wrote: *Why have dual axles when a single axle will do the job. *Is this a need for heavy two placed sailplanes? *I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. *Dual axles seem to be relatively popular in the UK. *Someone out there must have some explanation. *GA This was discussed June 17-19 this year under the topic "ASK-21 in Cobra trailer single or double axle?". My reply follows: 1 axle is better IMHO because: You don't need 2 axles for load bearing 2 axles = 2x the tires to worry about 2 axle rigs tend to push the tow vehicle around a bit more and can have funky ride dynamics - especially for small vehicles - at least in my antiquated experience 2 axle rigs are a bit tougher to push around by hand You generally have to pay for a second axle The only consideration I can imagine is for extremely heavy gliders (check the tire load limits) or potentially to keep from getting stuck in very soft fields. *Neither is a sufficient reason to justify all the negatives. *In the US they were briefly popular in the late 70's/ early 80's but quickly fell out of favor. *You see almost none shipped this way today. 9B We were pretty happy that our duo trailer had two axles when one of them fell off en route to Scotland! |
#5
|
|||
|
|||
![]()
On Nov 2, 2:52*pm, glider wrote:
*Why have dual axles when a single axle will do the job. *Is this a need for heavy two placed sailplanes? *I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. *Dual axles seem to be relatively popular in the UK. *Someone out there must have some explanation. *GA Typically Cobra or Comet trailers with a 15m or standard class ships in them weigh about 2000 lbs. Alco axles come standard on the Cobras and the axles are rated about 1000 kg (2200 lbs). Add the extra weight of an open class ship and bigger trailer to accommodate and you're probably pretty close to 1200-1500 kg therefore it takes one more axle. |
#6
|
|||
|
|||
![]()
glidergeek wrote:
On Nov 2, 2:52 pm, glider wrote: Why have dual axles when a single axle will do the job. Is this a need for heavy two placed sailplanes? I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. Dual axles seem to be relatively popular in the UK. Someone out there must have some explanation. GA Typically Cobra or Comet trailers with a 15m or standard class ships in them weigh about 2000 lbs. Alco axles come standard on the Cobras and the axles are rated about 1000 kg (2200 lbs). Add the extra weight of an open class ship and bigger trailer to accommodate and you're probably pretty close to 1200-1500 kg therefore it takes one more axle. You can get a Cobra trailer with a single axle for a Duo Discus XLT. There is a "Heavy duty axle" option on the price list. I know a Nimbus 4DM weighs a lot more, but presumably the heavier axle can handle this too. I have given this some thought and the only advantage I can see with a dual axle is that it would/might allow a smoother ride for the trailer and contents through potholes etc. But at the cost of more vibration the rest of the time. No real justification for using a dual axle - there are so few circumstances where it would be better. Certainly my medium term plans include converting my current dual axle trailer to single. |
#7
|
|||
|
|||
![]()
glidergeek wrote:
On Nov 2, 2:52 pm, glider wrote: Why have dual axles when a single axle will do the job. Is this a need for heavy two placed sailplanes? I know twin axles are beasts to wrestle when pushing it around unless you want to go forwards and backwards. Dual axles seem to be relatively popular in the UK. Someone out there must have some explanation. GA Typically Cobra or Comet trailers with a 15m or standard class ships in them weigh about 2000 lbs. Alco axles come standard on the Cobras and the axles are rated about 1000 kg (2200 lbs). Add the extra weight of an open class ship and bigger trailer to accommodate and you're probably pretty close to 1200-1500 kg therefore it takes one more axle. My 18M ASH 26 E Cobra trailer has the 1300 kg (2870 pounds) Al-Ko axle, which is adequate for even an Open Class motorglider like the Nimbus 4M a friend has. Al-Ko offers the same style axles up to 8000 pound capacity, but I don't know what capacities Cobra offers. I suspect the major reason for choosing the dual axle trailer is for more stability. -- Eric Greenwell - Washington State, USA * Change "netto" to "net" to email me directly * "A Guide to Self-launching Sailplane Operation" at www.motorglider.org |
#8
|
|||
|
|||
![]() My 18M ASH 26 E Cobra trailer has the 1300 kg (2870 pounds) Al-Ko axle, which is adequate for even an Open Class motorglider like the Nimbus 4M a friend has. Al-Ko offers the same style axles up to 8000 pound capacity, but I don't know what capacities Cobra offers. I suspect the major reason for choosing the dual axle trailer is for more stability. -- I have a big heavy trailer for a vintage two place. The trailer had dual axles and would sway at normal cruise speeds. Add a lot of weight in front and it made no difference. Increase tyre pressure and still no improvement. Converted to single axle and problem is solved. GA |
#9
|
|||
|
|||
![]()
glider wrote:
My 18M ASH 26 E Cobra trailer has the 1300 kg (2870 pounds) Al-Ko axle, which is adequate for even an Open Class motorglider like the Nimbus 4M a friend has. Al-Ko offers the same style axles up to 8000 pound capacity, but I don't know what capacities Cobra offers. I suspect the major reason for choosing the dual axle trailer is for more stability. -- I have a big heavy trailer for a vintage two place. The trailer had dual axles and would sway at normal cruise speeds. Add a lot of weight in front and it made no difference. Increase tyre pressure and still no improvement. Converted to single axle and problem is solved. Do you have a guess as to why it's stability improved? -- Eric Greenwell - Washington State, USA * Change "netto" to "net" to email me directly * "A Guide to Self-launching Sailplane Operation" at www.motorglider.org |
#10
|
|||
|
|||
![]()
On Nov 4, 9:09*am, Eric Greenwell wrote:
glider wrote: My 18M ASH 26 E Cobra trailer has the 1300 kg (2870 pounds) Al-Ko axle, which is adequate for even an Open Class motorglider like the Nimbus 4M a friend has. Al-Ko offers the same style axles up to 8000 pound capacity, but I don't know what capacities Cobra offers. I suspect the major reason for choosing the dual axle trailer is for more stability. -- *I have a big *heavy trailer for a vintage two place. The trailer had dual axles and would sway at normal cruise speeds. Add a lot of weight in front and it made no difference. Increase tyre pressure and still no improvement. *Converted to single axle and problem is solved. Do you have a guess as to why it's stability improved? -- Eric Greenwell - Washington State, USA * Change "netto" to "net" to email me directly * "A Guide to Self-launching Sailplane Operation" atwww.motorglider.org I can imagine why people think a dual axle would be more stable but this was never my experience. I found when my dual axle trailer got pushed off line (as by a passing 18-wheeler) it was slightly more persistent in trying to shove the car around - I suspect because it wanted to keep going where the dual wheels were pointed. I recall more shimmy-ing and vibration, but never more stability. The only change I've ever made to the whole vehicle-trailer system that improved stability was to get a heavier vehicle with a large tire contact patch and a short distance between the rear wheels to the ball (in my case a VW Tourareg). That made a huge difference - I've never had the least amount of sway towing - all the way up to 105 mph. (No, I don't tow that fast normally). My two generations prior tow vehicle (a VW Scirocco) actually got spun around backwards by a glider trailer on straight dirt road by a 20 mph tailwind. The vehicle and trailer is a dynamic system - so the sway characteristics are determined by the combination. Given the long moment arms and significant rotational inertias of a glider trailer, I believe the biggest stabilizing force is the way that rotational inertia is transmitted into the tow vehicle and how the tow vehicle's weight, geometry, suspension and tires damp it all out. I've never found changing tongue weight or the number of axles to have anything but minor effects on stability. Since glider trailers are more alike than they are different when compared to other types of trailers I suspect you can find out a lot about what works by talking to glider owners with different tow vehicles more than different trailer configurations. 9B |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Steel Axles | Alan & Ruth Glatt | Home Built | 0 | December 13th 05 12:59 AM |
Wheel, axles and brakes for sale. | [email protected] | Home Built | 0 | December 5th 05 02:51 PM |
WTB: Tomahawk Gear Axles / Brake Calipers | spar | Aviation Marketplace | 0 | January 1st 05 05:46 PM |
WTB: Tomahawk Gear Axles / Brake Calipers | spar | General Aviation | 0 | January 1st 05 05:46 PM |
Cessna wheela and axles | clare @ snyder.on .ca | Home Built | 2 | January 10th 04 04:52 PM |