![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
While the engine is being torn down and inspected after our nosegear
collapse and subsequent prop strike, I am taking the opportunity to ride on the insurance company's labor bill by having the mechanic install some new parts. I am open to suggestions as to other items to consider, though my budget is getting weary---I bought this plane 4 days before it broke. The prop strike tear-down includes all new bearings, seals, a new vacuum pump, and inspection of all steel items---crankcase, crankshaft, etc. This obviously includes engine disassembly. For reassembly I am providing the mechanic the following parts: - new engine hoses, firesleeved teflon: about $1000 - a new lightweight starter to offset weight of 3-bladed prop: $375 The insurance company is already providing, or has agreed to provide: - new 3-bladed MacCauley propeller - rebuilt exhaust system Now we get to the "other stuff". Here's what I have planned, including parts & labor: - landing gear retract system overhaul: about $2500 - add a JPI EDM-700 engine monitor: about $2500 - let's not forget the deductible: $500 And the stuff not related to the accident--er, incident: - add a vertical card compass, as my whiskey compass died: about $400 - add a new intercom with music inputs, crew switch, etc.: about $600 So, thus far I am spending close to $8000. It could be less, depending on what the landing gear needs. My goal is not to have the prettiest plane in the sky, nor the most technologically advanced, but I want it to be safe and reliable. Am I missing anything? Your opinions are welcome (duck!) thanks Jefro |
#2
|
|||
|
|||
![]() On 9-Jul-2003, Jeff Osier-Mixon wrote: My goal is not to have the prettiest plane in the sky, nor the most technologically advanced, but I want it to be safe and reliable. Am I missing anything? Your opinions are welcome (duck!) It would help to know the model and vintage of the airplane, and how it was equipped "pre-incident". -Elliott Drucker |
#3
|
|||
|
|||
![]() It would help to know the model and vintage of the airplane, and how it was equipped "pre-incident". Doy... sorry. 1978 Beechcraft Sierra C24R Lycoming IO-360 Equipment is all standard, mostly older King radios. The only "extra" engine instrument is a Davtron that shows OAT and voltage. A solid basic plane, with a minor gear problem. |
#4
|
|||
|
|||
![]()
Don't forget the Standby Vacuum Pump !!!
Jeff Osier-Mixon wrote: It would help to know the model and vintage of the airplane, and how it was equipped "pre-incident". Doy... sorry. 1978 Beechcraft Sierra C24R Lycoming IO-360 Equipment is all standard, mostly older King radios. The only "extra" engine instrument is a Davtron that shows OAT and voltage. A solid basic plane, with a minor gear problem. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Terra Switch repair | George A. Graham | Home Built | 1 | October 25th 03 12:15 AM |