XC Soar map help needed

Running XC Soar on an Ipaq 2215. The program loaded and runs fine as well
as the Flashcard GPS unit. My problem is how do you load the map data into
the program? I have gone to the Naviter web site and downloaded the map
covering this area,but can't get XC Soar to find it.

Ken

Ken Latam wrote:
Running XC Soar on an Ipaq 2215. The program loaded and runs fine as well
as the Flashcard GPS unit. My problem is how do you load the map data into
the program? I have gone to the Naviter web site and downloaded the map
covering this area,but can't get XC Soar to find it.

Hi Ken,

you can download pregenerated map files on our web site:

http://www.xcsoar.org/download/maps/

Naviter is our competitor, they're using a proprietary map format that
is not supported by XCSoar.

Max

Hi Ken,
you can download pregenerated map files on our web site:

http://www.xcsoar.org/download/maps/

Naviter is our competitor, they're using a proprietary map format that is
not supported by XCSoar.

Max
Thanks a bunch. BUT I need the map that is the next area EAST of:

CAN_SE_BC

Any chance of it being added?

Ken

On Jun 6, 7:30*pm, Ken Latam wrote:
Hi Ken,

you can download pregenerated map files on our web site:

*http://www.xcsoar.org/download/maps/

Naviter is our competitor, they're using a proprietary map format that is
not supported by XCSoar.

Max

Thanks a bunch. BUT I need the map that is the next area EAST of:

CAN_SE_BC

Any chance of it being added? *

Ken

Have you tried Mapgen as Xtophe suggested? If it works as it used to,
you can supply the coordinates of the corners of the area you want, or
your waypoint file.

Have you tried Mapgen as Xtophe suggested? If it works as it used to,
you can supply the coordinates of the corners of the area you want, or
your waypoint file.

Yes. Wonderfull site,exact area I need. But I still cannot add the map
data to the XC Soar. In the setup system window #1 "site" when the map
database box is tapped, an empty screen is shown. It looks like the .xcm
map file should be listed here,but it is not.

It is added to the program file's next to XC Soar,but will not transfer
over.

Now what?

Ken

Ken Latam wrote:
But I still cannot add the map data to the XC Soar. In the setup
system window #1 "site" when the map database box is tapped, an
empty screen is shown. It looks like the .xcm map file should be
listed here,but it is not.

It is added to the program file's next to XC Soar,but will not transfer
over.

Did you copy the .XCM file to the XCSoarData folder? The XCSoar
manual describes this in detail.

To help you further, I need more information about your setup - what
device? What operating system? Where and how did you install XCSoar?
Where did you copy the other data files? etc.

On Jun 6, 7:30*pm, Ken Latam wrote:
Hi Ken,

you can download pregenerated map files on our web site:

*http://www.xcsoar.org/download/maps/

Naviter is our competitor, they're using a proprietary map format that is
not supported by XCSoar.

Max

Thanks a bunch. BUT I need the map that is the next area EAST of:

CAN_SE_BC

Any chance of it being added? *

Ken

I'm pretty sure the you can generate it with Mapgen as Xtophe
suggested.

On Jun 6, 2:11*pm, Max Kellermann wrote:
Ken Latam wrote:
Running XC Soar on an Ipaq 2215. The program loaded and runs fine as well
as the Flashcard GPS unit. My problem is how do you load the map data into
the program? I have gone to the Naviter web site and downloaded the map
covering this area,but can't get XC Soar to find it.

Hi Ken,

you can download pregenerated map files on our web site:

*http://www.xcsoar.org/download/maps/

Naviter is our competitor, they're using a proprietary map format that
is not supported by XCSoar.

Max

Okay, now I'm confused too. I used the link above, and downloaded the
map for Truckee. I extracted all the files from the zipped folder,
and then searched for a file with an xcm extension, but found none.

Grider Pirate wrote:
Okay, now I'm confused too. I used the link above, and downloaded the
map for Truckee. I extracted all the files from the zipped folder,
and then searched for a file with an xcm extension, but found none.

XCM files are technically ZIP files, but they should not be extracted.
The "zipped folder" you mean is the XCM file.

On Jun 7, 10:43*pm, Max Kellermann wrote:
Grider Pirate wrote:
Okay, now I'm confused too. *I used the link above, and downloaded the
map for Truckee. *I extracted all the files from the zipped folder,
and then searched for a file with an xcm extension, but found none.

XCM files are technically ZIP files, but they should not be extracted.
The "zipped folder" you mean is the XCM file.

Thanks Max. I ended up using the Map Generator and providing my
waypoint file. Works fine!
BTW, thanks for all the work you and the others on the XCSoar team do.