![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hi All - Version 2.40 is now released, now including airspace warnings.
Thanks to all of you that helped with review and testing. Please read the release notes carefully! A big thanks to John Leibacher, who rebuilt the airspace portions of NDB files on the world-wide turnpoint exchange to better support the SN10 airspace warning feature. Grab your updated NDB file he http://soaringweb.org/TP Thanks again John! Special thanks to Billy, Lynn, and Roger for flight-test during winter months when I was unable (Boston weather has been challenging). Download he http://www.nadler.com/sn10/SN10_Resource_Index.html, or http://www.ilec-gmbh.com/downloads_sw_en.html Hope to see many of you shortly at the Seniors! Enjoy, Best Regards, Dave |
#2
|
|||
|
|||
![]()
Fantastic! Thanks!!!!!
|
#3
|
|||
|
|||
![]()
The weather in Southern California has been wonderful. 80 degrees today in San Diego!
Oh, thanks Dave for all you do! On Friday, February 27, 2015 at 3:05:48 PM UTC-8, Dave Nadler wrote: Hi All - Version 2.40 is now released, now including airspace warnings. Thanks to all of you that helped with review and testing. Please read the release notes carefully! A big thanks to John Leibacher, who rebuilt the airspace portions of NDB files on the world-wide turnpoint exchange to better support the SN10 airspace warning feature. Grab your updated NDB file he http://soaringweb.org/TP Thanks again John! Special thanks to Billy, Lynn, and Roger for flight-test during winter months when I was unable (Boston weather has been challenging). Download he http://www.nadler.com/sn10/SN10_Resource_Index.html, or http://www.ilec-gmbh.com/downloads_sw_en.html Hope to see many of you shortly at the Seniors! Enjoy, Best Regards, Dave |
#4
|
|||
|
|||
![]()
Thanks Dave. Looks great!
|
#5
|
|||
|
|||
![]()
I've downloaded the hex file like previous updates (SN10B.HEX)to the root of my thumb drive. When I attach it to my adaptor, my SN10B sees the software download, but it will not install it. The program just sits there with Software Loading ... on the screen. I've tried loading it using other thumb drives. In each case it sees it, but will not install it. I've upgraded my box a couple of times, so I think I know what i'm doing. Any advice. By the way, I got the hex file from the ZIP file of all the different software. My SN10B currently has 2.37 on it.
Thanks for any help you can give me. |
#6
|
|||
|
|||
![]()
Had a similar experience, but eventually got it to work by restarting the pc. Might have been a serial port issue. With the computer it showed a serial port error. Try loading a ndb waypoint file. It does work.
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
ILEC SN10 version 2.39 available | Dave Nadler | Soaring | 0 | May 3rd 14 05:02 PM |
ILEC SN10 version 2.36 available | Dave Nadler | Soaring | 1 | May 5th 11 04:48 PM |
ILEC SN10 release 2.35 | Dave Nadler | Soaring | 7 | March 27th 10 07:46 PM |
ILEC SN10 and SN10B version 2.34 release | Dave Nadler | Soaring | 0 | September 21st 09 11:43 PM |
ILEC SN10 release 2.33 available | Dave Nadler | Soaring | 2 | July 24th 09 02:22 PM |