PowerFLARM Portable Firmware Update: 6.02

IMPORTANT
PowerFLARM Portable Firmware Update: 6.02
PowerFLARM Portable users should update to version 6.02 ASAP. There was a
bug in version 6.00 which caused it to show "Towplane" as the aircraft type
when it should have displayed "glider". That may have caused users to select
the wrong aircraft type. After you upgrade be sure to verify the aircraft
type setting.
http://flarm.com/support/firmware-up...are-version-6/

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

On Friday, April 3, 2015 at 10:30:28 AM UTC-4, Paul Remde wrote:
IMPORTANT
PowerFLARM Portable Firmware Update: 6.02
PowerFLARM Portable users should update to version 6.02 ASAP. There was a
bug in version 6.00 which caused it to show "Towplane" as the aircraft type
when it should have displayed "glider". That may have caused users to select
the wrong aircraft type. After you upgrade be sure to verify the aircraft
type setting.
http://flarm.com/support/firmware-up...are-version-6/

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

I cant find a 6.02 version??
Glen

On 04/03/2015 9:39 PM, wrote:
On Friday, April 3, 2015 at 10:30:28 AM UTC-4, Paul Remde wrote:
IMPORTANT
PowerFLARM Portable Firmware Update: 6.02
PowerFLARM Portable users should update to version 6.02 ASAP. There was a
bug in version 6.00 which caused it to show "Towplane" as the aircraft type
when it should have displayed "glider". That may have caused users to select
the wrong aircraft type. After you upgrade be sure to verify the aircraft
type setting.
http://flarm.com/support/firmware-up...are-version-6/

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

I cant find a 6.02 version??
Glen

direct link here

http://flarm.com/wp-content/uploads/...PF6.02_7592.fw

On Friday, April 3, 2015 at 10:30:28 AM UTC-4, Paul Remde wrote:
IMPORTANT
PowerFLARM Portable Firmware Update: 6.02
PowerFLARM Portable users should update to version 6.02 ASAP. There was a
bug in version 6.00 which caused it to show "Towplane" as the aircraft type
when it should have displayed "glider". That may have caused users to select
the wrong aircraft type. After you upgrade be sure to verify the aircraft
type setting.
http://flarm.com/support/firmware-up...are-version-6/

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

Ok, found it, but it's just for the portable unit right?
Glen

Our club had a bunch more "towplanes" that got put back to gliders.

The other problem is that the Flarm Configuration Tool,asks for device
type:

FLAPFC10A through FLAPD11E

The serial number shows in the FLARMCSV file, but how do we figure what
kind of FLAP.... we have, especially with the Cores which are typically
buried where the label is not visible.



At 01:47 04 April 2015, wrote:
On Friday, April 3, 2015 at 10:30:28 AM UTC-4, Paul Remde wrote:
IMPORTANT
PowerFLARM Portable Firmware Update: 6.02
PowerFLARM Portable users should update to version 6.02 ASAP. There was
a

bug in version 6.00 which caused it to show "Towplane" as the aircraft
type
when it should have displayed "glider". That may have caused users to
select
the wrong aircraft type. After you upgrade be sure to verify the
aircraft

type setting.
http://flarm.com/support/firmware-up...are-version-6/

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

Ok, found it, but it's just for the portable unit right?
Glen

On Saturday, April 4, 2015 at 12:30:05 AM UTC-4, George Haeh wrote:
Our club had a bunch more "towplanes" that got put back to gliders.

The other problem is that the Flarm Configuration Tool,asks for device
type:

FLAPFC10A through FLAPD11E

The serial number shows in the FLARMCSV file, but how do we figure what
kind of FLAP.... we have, especially with the Cores which are typically
buried where the label is not visible.


Look in a downloaded IGC file and you'll see a line like this,
around 25 lines from the beginning of the file:
LFLA16145707DEVNO FLAPFC10A-000127

Hope that helps!
Best Regards, Dave

On Friday, April 3, 2015 at 9:47:15 PM UTC-4, wrote:
http://flarm.com/support/firmware-up...are-version-6/
Ok, found it, but it's just for the portable unit right?
Glen

There is one firmware file for all PowerFLARM devices (portable and brick):
http://flarm.com/support/firmware-up...are-version-6/

Hope that helps,
Best Regards, Dave

My FLARM read Towplane when I first turned it on, but I changed it to Sailplane...........Do Really need to re-program to 6.02?
JJ

I think the problem JJ, is that no matter what you select it still thinks you're a towplane.

Updated to 6.02 this morning and it worked fine for practice say at PAGC

I changed it to Glider, but I suspect the change did not stick. Have a
look at your unit after you power it up.

At 16:10 04 April 2015, JJ Sinclair wrote:
My FLARM read Towplane when I first turned it on, but I changed it to
Sailplane...........Do Really need to re-program to 6.02?
JJ