![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I promised Bill Daniels that I'd burn him a DVD of some of my winch
videos and the result is pretty horrible quality which is a result of two things. A. I'm using Pinnacle Studio 8 and it's given me some problems and I'm more than a bit peeved that in less than 6 months I am foced to buy Version 9 and all support for 8 is gone. B. My DVD burner is in my winpy laptop rather than my desktop which has more power. After 3 hours of "churning then burning" the video on the DVD is junk. Bottom line is I need to probably do two things. 1. Buy a DVD burner for my desktop. 2. If there is better software out there that's better for not too much then I'd like some recommendations. I'm running XP pro with plenty of memory and speed. Thanks, Mark |
#2
|
|||
|
|||
![]()
I shar your thought 100% on Pinnacle ver. 8. It cost a lot of $$$ and then a
few "weeks" later I am forced to upgrade. The owners must be related to Bill Gates. Joel |
#3
|
|||
|
|||
![]() |
#4
|
|||
|
|||
![]()
Colin wrote in message . ..
(CO2ID) wrote: http://www.serif.com Might look at "Movie Plus". IF it looks good to you, DON'T ORDER ON LINE. Call them, discounts are normally more than 50%. I haven't used it much, but it seems to grab video from my VCR nicely. Don't have an output on my Cam, can't say anything about that. Editor is sorta nice, but different to use. |
#5
|
|||
|
|||
![]()
Adobe premiere
Ian "Mark Zivley" wrote in message ... I promised Bill Daniels that I'd burn him a DVD of some of my winch videos and the result is pretty horrible quality which is a result of two things. A. I'm using Pinnacle Studio 8 and it's given me some problems and I'm more than a bit peeved that in less than 6 months I am foced to buy Version 9 and all support for 8 is gone. B. My DVD burner is in my winpy laptop rather than my desktop which has more power. After 3 hours of "churning then burning" the video on the DVD is junk. Bottom line is I need to probably do two things. 1. Buy a DVD burner for my desktop. 2. If there is better software out there that's better for not too much then I'd like some recommendations. I'm running XP pro with plenty of memory and speed. Thanks, Mark |
#6
|
|||
|
|||
![]()
Looks like great software, but at $700 list on the web site I was hoping
for something under a 1/3 of that.... tango4 wrote: Adobe premiere Ian "Mark Zivley" wrote in message ... I promised Bill Daniels that I'd burn him a DVD of some of my winch videos and the result is pretty horrible quality which is a result of two things. A. I'm using Pinnacle Studio 8 and it's given me some problems and I'm more than a bit peeved that in less than 6 months I am foced to buy Version 9 and all support for 8 is gone. B. My DVD burner is in my winpy laptop rather than my desktop which has more power. After 3 hours of "churning then burning" the video on the DVD is junk. Bottom line is I need to probably do two things. 1. Buy a DVD burner for my desktop. 2. If there is better software out there that's better for not too much then I'd like some recommendations. I'm running XP pro with plenty of memory and speed. Thanks, Mark |
#7
|
|||
|
|||
![]()
Sorry but I can't do anything about that
:-) "Mark Zivley" wrote in message m... Looks like great software, but at $700 list on the web site I was hoping for something under a 1/3 of that.... |
#8
|
|||
|
|||
![]()
Allow me use this opportunity to introduce myself to the group and to
shamelessly promote my company's video editing software at the same time :-) I work for Pure Motion Ltd here in the UK but I'm also a keen glider pilot. You can see some gliding influences on our website in the top-right logo and the fact that the panorama on the front page was taken on the same day as my one and only visit to Omarama. Anyway, to get the point: you might like to try EditStudio, our video editing software as well as the MPEG XS plugin and DVD-lab for burning to DVD. All are available as trial downloads from our website. Both EditStudio and DVD-lab have won numerous awards from the press in the UK (from, among others, Computer Video, PC Format and PC Plus magazines). MPEG XS, our MPEG codec uses the same high quality encoder engine as some much more expensive software so you shouldn't be disappointed in the quality of the output. Finally, we offer unparalleled customer support. We usually answer email queries within an hour or so as well as supporting users via our website community. We don't abandon our customers when we release new versions of the software either. Caution: I am affiliated with Pure Motion - I work for them! Thanks, -- Graham Dean, Pure Motion Ltd, www.puremotion.com |
#9
|
|||
|
|||
![]()
Adobe Premier - lots of money but you get what you pay for....
williscomb |
#10
|
|||
|
|||
![]()
Mark Zivley wrote in message m...
I'm using Pinnacle Studio 8 and it's given me some problems and I'm more than a bit peeved that in less than 6 months I am foced to buy Version 9 and all support for 8 is gone. B. Bottom line is I need to probably do two things. 1. Buy a DVD burner for my desktop. 2. If there is better software out there that's better for not too much then I'd like some recommendations. I'm running XP pro with plenty of memory and speed. Eighteen months ago I bought a Mac, with about half my motivation being that the user reviews I saw of Windows video editing sw were about 80% like your posting, even on Pinnacle Studio which had been selected as Editor's Choice by numerous places. One place even retracted their Editor's Choice designation (and didn't reassign it) when most of their readers complained. Apple's iMovie and iDVD aren't perfect, but much better than the horror stories I hear in Windows land. Also ... I almost have no worries about viruses. It's true Mac hardware is a bit more expensive than comparable Windows iron, but when you add in the cost of software to try and imitate the software that comes with the Mac, I think it works out the other way. Not to mention the value of your time and aggravation. And, yes, I've used it to edit some soaring videos I've shot and am very happy with the results. Hope this helps. Martin |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free Flight Planning Software | Dean Wilkinson | Piloting | 20 | September 25th 04 03:38 AM |
Free Flight Planning Software | Dean Wilkinson | Products | 0 | September 18th 04 10:44 PM |
Next: Aviation Map software | Toks Desalu | Piloting | 5 | May 24th 04 07:55 PM |
slightly off topic | Rick Pellicciotti | Home Built | 0 | March 15th 04 02:10 AM |
Real World Specs for FS 2004 | Paul H. | Simulators | 16 | August 18th 03 09:25 AM |