![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and
will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! Jon Kraus '79 Mooney 201 4443H @ TYQ |
#2
|
|||
|
|||
![]()
On Tue, 11 Oct 2005 22:27:49 GMT, Jon Kraus
wrote: Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! If the cost of buying and installing a 155 seems steep, contact me. The club has two "working when removed" 170Bs, one with tray, which you wouldn't need. You can have your choice of either radio without the tray for $150 and shipping. I'm in Redwood City, Calif. , 30 miles south of San Francisco. Don Tuite dtuite insert commercial "at" sign penton.com |
#3
|
|||
|
|||
![]()
Thanks for the offer Don.... I'll keep it in mind...
Jon Kraus '79 Mooney 201 4443H @ TYQ Don Tuite wrote: On Tue, 11 Oct 2005 22:27:49 GMT, Jon Kraus wrote: Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! If the cost of buying and installing a 155 seems steep, contact me. The club has two "working when removed" 170Bs, one with tray, which you wouldn't need. You can have your choice of either radio without the tray for $150 and shipping. I'm in Redwood City, Calif. , 30 miles south of San Francisco. Don Tuite dtuite insert commercial "at" sign penton.com |
#4
|
|||
|
|||
![]()
Don,
I tried sending you an email and it bounced back no good. Please send me an email so we can discuss your offer. Thanks!! Jon Kraus '79 Mooney 201 4443H @ TYQ Don Tuite wrote: On Tue, 11 Oct 2005 22:27:49 GMT, Jon Kraus wrote: Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! If the cost of buying and installing a 155 seems steep, contact me. The club has two "working when removed" 170Bs, one with tray, which you wouldn't need. You can have your choice of either radio without the tray for $150 and shipping. I'm in Redwood City, Calif. , 30 miles south of San Francisco. Don Tuite dtuite insert commercial "at" sign penton.com |
#5
|
|||
|
|||
![]()
Hey Jon, there's also Gulf Coast Avionics http:/www.avionix.com. I bought a
couple of KX-155s from them a few years ago. Returned a couple of MX170s (I think that's what they were) that I bought there and it was no hassle, good customer service. The KX-155s worked out fine. That airplane is on its second owner since me and still has those radios installed. Dave Jon Kraus wrote: Don, I tried sending you an email and it bounced back no good. Please send me an email so we can discuss your offer. Thanks!! Jon Kraus '79 Mooney 201 4443H @ TYQ Don Tuite wrote: On Tue, 11 Oct 2005 22:27:49 GMT, Jon Kraus wrote: Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! If the cost of buying and installing a 155 seems steep, contact me. The club has two "working when removed" 170Bs, one with tray, which you wouldn't need. You can have your choice of either radio without the tray for $150 and shipping. I'm in Redwood City, Calif. , 30 miles south of San Francisco. Don Tuite dtuite insert commercial "at" sign penton.com -- Dave Butler, software engineer 919-392-4367 |
#6
|
|||
|
|||
![]()
On Tue, 11 Oct 2005 22:27:49 GMT, Jon Kraus wrote:
Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! Dang Jon, Your plane talking to mine? My DG is going belly up, and rather it give up the ghost in the clag, I am getting a new one put in. DG was original to the plane and the avionics person said it was so old, there was no core value to it! Pricey little devil, that DG with header bug. While in the shop, getting my Nav1 and Nav2 calibrated, altimeter rechecked and encoder rechecked (last two items were adjusted on my .411 413 check, so luckily under warrantee) Altimeter as off by 45 feet when set against ATIS. Encoder was reporting me 300 feet higher then the altimeter. Found this out climbing out in IMC my last time doing approaches. I adjusted my altimeter so I wouldn't get busted and took it in to get check out the next day. Next up is annual, getting that done the last week of the month so it can be signed off November 1st. October is going to be a very pricey month. If all pans out, got a nice long XC planned to Ohio and Maryland the 2nd week of November. I am keeping my fingers crossed, but if my budget allows for it, I will be looking at new radios in 6 months. Garmin 430 for sure, not sure what to do for the second radio yet. After the radios, then a new interior. Not planning to upgrade my plane, so I might as well go in comfort *smile* Allen |
#7
|
|||
|
|||
![]()
Why you rich SOB!! :-) You got a lot of extra AMU's floating around
huh? We got a new DG w/ heading bug for 1 AMU when we got our STEC-30 installed in August. I think it is a Sigmatek but I could be wrong.. Good luck on your annual... I can't remember if this is your first or second... I hope it is your second because the first one's hurt like Polio... almost 9 AMU's for ours. Let me know how you come out. Where in Ohio are you going to? That is close to Indianapolis. Maybe our paths will cross... As far as radios go I like the King KX-155 but they are salty. I saw some TKM MX-170 that look pretty interesting. They are pretty much Plug-and-Play for the KX-170B that crapped out. I think that Jay Honeck used to have one in his Warrior and liked it. They are about 1/2 the price of the King KX-155's. (1.5 AMU's vs 2.7 AMU) plus no rewiring to do. I'll let ya know what we do and by the time you upgrade we will have had ours for a while. You'll love the 430... It is the Bomb!! We got on the WAAS upgrade list so whenever Garmin gets it together we will be ready. I agree with the comfort thing too... I am looking at the sheepskin covers for our front seats. Nice and comfy!! Jon Kraus '79 Mooney 201 4443H @ TYQ A Lieberman wrote: On Tue, 11 Oct 2005 22:27:49 GMT, Jon Kraus wrote: Our 2nd Nav/Com on our '79 201 is a KX170B. It has went on the fritz and will cost .7 AMU's to repair. We were looking to maybe replace it with a KX155 (14 volt), preferably w/o the glidescope. Does anyone have an idea on where we might find one for a reasonalble price? Any advise would be appreciated. Thanks!! Dang Jon, Your plane talking to mine? My DG is going belly up, and rather it give up the ghost in the clag, I am getting a new one put in. DG was original to the plane and the avionics person said it was so old, there was no core value to it! Pricey little devil, that DG with header bug. While in the shop, getting my Nav1 and Nav2 calibrated, altimeter rechecked and encoder rechecked (last two items were adjusted on my .411 413 check, so luckily under warrantee) Altimeter as off by 45 feet when set against ATIS. Encoder was reporting me 300 feet higher then the altimeter. Found this out climbing out in IMC my last time doing approaches. I adjusted my altimeter so I wouldn't get busted and took it in to get check out the next day. Next up is annual, getting that done the last week of the month so it can be signed off November 1st. October is going to be a very pricey month. If all pans out, got a nice long XC planned to Ohio and Maryland the 2nd week of November. I am keeping my fingers crossed, but if my budget allows for it, I will be looking at new radios in 6 months. Garmin 430 for sure, not sure what to do for the second radio yet. After the radios, then a new interior. Not planning to upgrade my plane, so I might as well go in comfort *smile* Allen |
#8
|
|||
|
|||
![]()
On Wed, 12 Oct 2005 02:11:08 GMT, Jon Kraus wrote:
Why you rich SOB!! :-) You got a lot of extra AMU's floating around huh? I need some auxillary pumps for my power source of my AMU's :-)) We got a new DG w/ heading bug for 1 AMU when we got our STEC-30 installed in August. I think it is a Sigmatek but I could be wrong.. 1.1 here installed. In this case, I figured to bite the bullet and get new. That's one instrument I don't want any doubts of operation :-) I am figuring on some serious IMC time up north this time of the year. I keep my fingers crossed that icing isn't a factor or it's a scrub for me. Good luck on your annual... I can't remember if this is your first or second... I hope it is your second because the first one's hurt like Polio... almost 9 AMU's for ours. This will be (hard to believe) my third annual. First one was 4.5 AMU, last one was 2.2 AMU and I hope this one will be less! Let me know how you come out. Where in Ohio are you going to? That is close to Indianapolis. Maybe our paths will cross... 11/12 thru 11/19. Will go from MBO to OWB to 2G2 (Owensboro). Day trips to Mansfield and Athens OH. Day trip to Westminister MD as well. do. I'll let ya know what we do and by the time you upgrade we will have had ours for a while. You'll love the 430... It is the Bomb!! We got on the WAAS upgrade list so whenever Garmin gets it together we will be ready. That's what my avionics man said, and who am I to question experience! I agree with the comfort thing too... I am looking at the sheepskin covers for our front seats. Nice and comfy!! Sounds like a winner for those cold days and hot days. No freezing or burning your rear end off. Allen |
#9
|
|||
|
|||
![]()
Day trips to Mansfield and Athens OH.
Take pictures of the gate guards in Mansfield. The Air Guard unit there is slated for decommissioning due to BRAC. |
#10
|
|||
|
|||
![]()
As stated earlier we are looking to replace our KX-170B (our 2nd
NAV/COM). As I was doing some research I stumbled across the TKM MX-170 http://www.avionix.com/rev-tkm.html On the surface this looks like a pretty good deal (1.5 AMU's new). I talked to a gentleman at Pacific Coast Avionics and he said that the TKM radios used to have some serious reliability issues they have cleaned up their act and are now a good radio and would recommend them.. The cool thing about this radio is that it just slides right into our now vacant slot where the 170B used to reside and you are finished. Plug and Play baby... Has anyone had any experience with these radios? Any feedback is much appreciated. Thanks!! Jon Kraus '79 Mooney 201 4443H @ TYQ |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
time for avionics upgrade... | kontiki | Owning | 12 | December 11th 04 06:15 PM |
A380 avionics | Sven Kesler | General Aviation | 0 | September 23rd 04 02:17 PM |
avionics shop - NJ, Eastern PA, IFR GPS | Ken | Owning | 11 | January 22nd 04 06:36 PM |
Used Avionics | O. Sami Saydjari | Instrument Flight Rules | 40 | December 2nd 03 02:53 PM |
FS: "Avionics Fundamentals" | barry | Aviation Marketplace | 0 | July 14th 03 07:28 PM |