![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I see this subject was discussed on the list back in '99, but I was
wondering what people have been doing lately. I am purchasing a Canadian registered 206 and am importing it into the US. The aircraft just had an annual, but the owner doesn't have insurance on it, so the option of having him fly it to the US isn't there. Can someone outline the best procedures to "quickly" get it registered in the US? Here's some questions: How do I get it across the border? I believe that you cannot go across with the temporary registration paperwork, but does that apply with an aircraft that's being exported? Is the bill of sale sufficient? I've got a Canadian license, so I can "legally" fly a C-numbered aircraft in Canada. Is there an option to deregister it in Canada and then get a ferry permit to cross the border? It seems like this would enable me to get the deregistration paperwork from Canada quicker. Can someone elaborate on the rest of the steps and does anyone have experience with the amount of time it has taken to do all of this? Thanks, Shad |
#2
|
|||
|
|||
![]()
I don't think you can fly a Canadian registered aircraft in Canada
without a Canadian certificate. I believe you can get a Canadian certificate on a temporary bases on your U.S. but you have to visit their FSDO. I would keep the existing registration and get a letter from the old owner saying you are authorized to fly it in Canada. I would avoid letting the customs people in the U.S. from knowing you bought it because I believe there is a big import tax. -Robert |
#3
|
|||
|
|||
![]()
"Robert M. Gary" writes:
I don't think you can fly a Canadian registered aircraft in Canada without a Canadian certificate. I believe you can get a Canadian certificate on a temporary bases on your U.S. but you have to visit their FSDO. But the OP said "I've got a Canadian license, so I can legally fly a C-numbered aircraft in Canada" in his message. This is getting to be a pet peeve of mine -- Usenet really works better if people read the messages they're responding to. -- David Dyer-Bennet, , http://www.dd-b.net/dd-b/ RKBA: http://www.dd-b.net/carry/ Pics: http://dd-b.lighthunters.net/ http://www.dd-b.net/dd-b/SnapshotAlbum/ Dragaera/Steven Brust: http://dragaera.info/ |
#4
|
|||
|
|||
![]() "Shad" writes: [...] I am purchasing a Canadian registered 206 and am importing it into the US. [...] Both AOPA and COPA have some information online about the overall process. I am told is FAR from painless, even if the airplane is fairly new. I hope you found out about things like taxes and import inspections before going through with this deal. - FChE |
#5
|
|||
|
|||
![]() "Shad" wrote in message oups.com... I see this subject was discussed on the list back in '99, but I was wondering what people have been doing lately. I am purchasing a Canadian registered 206 and am importing it into the US. The aircraft just had an annual, but the owner doesn't have insurance on it, so the option of having him fly it to the US isn't there. Where is it written that insurance is required to fly in the US? |
#6
|
|||
|
|||
![]() Steve Foley wrote: [...] Canadian registered 206 and am importing it into the US. The aircraft just had an annual, but the owner doesn't have insurance on it, so the option of having him fly it to the US isn't there. Where is it written that insurance is required to fly in the US? Unless the airplane is already sitting on the border, it would have to fly some way within canadian airspace. *That* is forbidden without insurance. - FChE |
#7
|
|||
|
|||
![]()
Frank is right - in Canada you need liability insurance to fly. Even
if you're flying a N-numbered aircraft up there, you'll legally need liability. I was able to find out some info from talking to several branches of the FAA and Transport Canada. I'll first beg the current owner to get insurance on it and fly it to the states. Otherwise, I'll have to keep it in Canada, deregister it, get it registered with the US and stick an N-number on it. Then I'll need a special flight authorization from Transport Canada to fly to the border and another one from the local FSDO to fly from the border to my desired airport in the states. After that, I'll need to get the equivalent of an annual and have a DAR come out and inspect the plane. He says it should take a 1/2 day and cost $500+travel. I found out that it had an airworthiness certificate in the US (for the first 9 hours), so I won't need to have Cessna get one of its reps to issue an "original" airworthiness cert. The only thing my A&P will need to do is put together a 337 for the Robertson STOL and hopefully the DAR will issue a CofA on the spot. I've been told that when importing to the US, there is no import or excise tax. Some states will tax the plane, but I believe that this would happen is you bought a plane in the US as well. If the plane was being imported to Canada, you'd be paying 7% for PST. So, the bottom line is that it doesn't look like it will cost much $$ and should be done in a reasonable amount of time as long as any mods on the aircraft were done correctly and have the supporting docs. I'll try to post what actually happens here when I get done. Wish me luck! Shad |
#8
|
|||
|
|||
![]()
On 13 Apr 2006 15:04:27 -0700, "Shad"
wrote: Did this several years ago. Make sure the airplane meets the type certificate to the T. All paperwork for all modifications must be in order. The DAR for my conformity inspection consisted of 10 minutes looking at the airplane, maybe an hour looking at the paperwork and an hour+ BS'ing with my IA.... More data points: The DAR I used (he was local) charged $200. Didn't have to pay any excise or import tax, but I did have to pay use tax (Washington State). You can't do a "nation-wide" title search in Canada. You have to do a title search in each province in which the aircraft was based / owned. Not the biggest deal in the world I guess, but it just made for several more hoops to jump through (as well as a few more C-notes spent). If I would have had to pay my IA by the hour to prepare the aircraft for the conformity inspection, any "benefit" of buying an airplane in Canada (as in lower price / exchange rates for example) would have been easily wiped out by his bill for his time.... Would I import an airplane from Canada again? Possibly... if the price was right and it was a desirable aircraft... but I'd only do it after I got my IA drunk 1st and then talked him into it! 8^) Bela P. Havasreti Frank is right - in Canada you need liability insurance to fly. Even if you're flying a N-numbered aircraft up there, you'll legally need liability. I was able to find out some info from talking to several branches of the FAA and Transport Canada. I'll first beg the current owner to get insurance on it and fly it to the states. Otherwise, I'll have to keep it in Canada, deregister it, get it registered with the US and stick an N-number on it. Then I'll need a special flight authorization from Transport Canada to fly to the border and another one from the local FSDO to fly from the border to my desired airport in the states. After that, I'll need to get the equivalent of an annual and have a DAR come out and inspect the plane. He says it should take a 1/2 day and cost $500+travel. I found out that it had an airworthiness certificate in the US (for the first 9 hours), so I won't need to have Cessna get one of its reps to issue an "original" airworthiness cert. The only thing my A&P will need to do is put together a 337 for the Robertson STOL and hopefully the DAR will issue a CofA on the spot. I've been told that when importing to the US, there is no import or excise tax. Some states will tax the plane, but I believe that this would happen is you bought a plane in the US as well. If the plane was being imported to Canada, you'd be paying 7% for PST. So, the bottom line is that it doesn't look like it will cost much $$ and should be done in a reasonable amount of time as long as any mods on the aircraft were done correctly and have the supporting docs. I'll try to post what actually happens here when I get done. Wish me luck! Shad |
#9
|
|||
|
|||
![]()
Thanks for the clarification.
I had ASS-U-ME-d that since it 'just had an annual' it was legal to fly in Canada "Frank Ch. Eigler" wrote in message ... Steve Foley wrote: [...] Canadian registered 206 and am importing it into the US. The aircraft just had an annual, but the owner doesn't have insurance on it, so the option of having him fly it to the US isn't there. Where is it written that insurance is required to fly in the US? Unless the airplane is already sitting on the border, it would have to fly some way within canadian airspace. *That* is forbidden without insurance. - FChE |
#10
|
|||
|
|||
![]()
I didn't have any special inspection expenses when I imported my 69
Arrow 5 years ago, and there were no import duties, etc either. The main hassles were with title search and currency exchange rates. It helps a lot if your initial inspection is done by an A&P who does cross-border inspections routinely. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
UAV's and TFR's along the Mexico boarder | John Doe | Piloting | 145 | March 31st 06 06:58 PM |
Most reliable homebuilt helicopter? | tom pettit | Home Built | 35 | September 29th 05 02:24 PM |
Washington DC airspace closing for good? | tony roberts | Piloting | 153 | August 11th 05 12:56 AM |
Homebuilt Aircraft Frequently Asked Questions List (FAQ) | Ron Wanttaja | Home Built | 0 | December 2nd 04 07:00 AM |
Homebuilt Aircraft Frequently-Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | July 4th 03 04:50 PM |