Hirth

I know that just about everybody has bad-mouthed the 2si, but what are your
opinions of the Hirth series?

In the past, lots of reports of quality control issues, vibration problems,
etc. but they seem to have worked out the kinks, or at least the latest
reports point in that direction. The US distributor knows his stuff, but he
can only sell product as good as the factory puts out. Personal opinion.

"chuck" wrote in message
...
I know that just about everybody has bad-mouthed the 2si, but what are your
opinions of the Hirth series?



--
Posted via a free Usenet account from http://www.teranews.com

Thank you,
I guess it'll have to be Rotex. Sure is nice to get different opinions from
the users.
"Juan Jimenez" wrote in message
.. .
In the past, lots of reports of quality control issues, vibration
problems, etc. but they seem to have worked out the kinks, or at least the
latest reports point in that direction. The US distributor knows his
stuff, but he can only sell product as good as the factory puts out.
Personal opinion.

"chuck" wrote in message
...
I know that just about everybody has bad-mouthed the 2si, but what are
your opinions of the Hirth series?



--
Posted via a free Usenet account from http://www.teranews.com

chuck wrote:
Thank you,
I guess it'll have to be Rotex. Sure is nice to get different opinions from
the users.
"Juan Jimenez" wrote in message
.. .
In the past, lots of reports of quality control issues, vibration
problems, etc. but they seem to have worked out the kinks, or at least the
latest reports point in that direction. The US distributor knows his
stuff, but he can only sell product as good as the factory puts out.
Personal opinion.

"chuck" wrote in message
...
I know that just about everybody has bad-mouthed the 2si, but what are
your opinions of the Hirth series?


...

What about Zenoah (Xenoah)?

--

FF

chuck wrote:
I know that just about everybody has bad-mouthed the 2si, but what are your
opinions of the Hirth series?

I do not know about all of them but I have had great experience with
a 3203 (fan cooled). The basic concept of nikocil/aluminum jugs is very
sound for air cooled engines. It is how Porsche 911s were made back
when they were aircooled.
As for the 2si, I would take another look at the new ones with the
larger flywheel - ignition trigger spacing. That should have cured
their ignition issues.

Thank you, I will

wrote in message
ups.com...

chuck wrote:
I know that just about everybody has bad-mouthed the 2si, but what are
your
opinions of the Hirth series?

I do not know about all of them but I have had great experience with
a 3203 (fan cooled). The basic concept of nikocil/aluminum jugs is very
sound for air cooled engines. It is how Porsche 911s were made back
when they were aircooled.
As for the 2si, I would take another look at the new ones with the
larger flywheel - ignition trigger spacing. That should have cured
their ignition issues.

wrote:
chuck wrote:
I know that just about everybody has bad-mouthed the 2si, but what are your
opinions of the Hirth series?

I do not know about all of them but I have had great experience with
a 3203 (fan cooled). The basic concept of nikocil/aluminum jugs is very
sound for air cooled engines. It is how Porsche 911s were made back
when they were aircooled.
As for the 2si, I would take another look at the new ones with the
larger flywheel - ignition trigger spacing. That should have cured
their ignition issues.

Hello, I tought 2si did no longer made engine for aviation

J.P.

I really don't know anything about the hirth engine ,,never seen one fly
long enough to establish any kind of history . The nickle sil cylinders
works well for a four cycle engine but it has failed badly in the two cycle
except model airplane engines . No matter which engine you choose , one will
always have problems of some sort . Rotax seems to be the engine that gives
the least amount of it.
"J.P." wrote in message
ups.com...

wrote:
chuck wrote:
I know that just about everybody has bad-mouthed the 2si, but what are
your
opinions of the Hirth series?

I do not know about all of them but I have had great experience with
a 3203 (fan cooled). The basic concept of nikocil/aluminum jugs is very
sound for air cooled engines. It is how Porsche 911s were made back
when they were aircooled.
As for the 2si, I would take another look at the new ones with the
larger flywheel - ignition trigger spacing. That should have cured
their ignition issues.

Hello, I tought 2si did no longer made engine for aviation

J.P.