![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#61
|
|||
|
|||
![]()
I think the only 'gotchas' would be slat rigging, which is certainly an
art in itself. A poorly rigged slat could spell disaster. Not usually a problem if only called upon to do their job in 1 G level flight. It's slat behavior in the flight regime at 300+KIAS that mark the work of a capable airframes shop. R / John |
#62
|
|||
|
|||
![]()
A poorly rigged slat could spell disaster.
Not usually a problem if only called upon to do their job in 1 G level flight. It's slat behavior in the flight regime at 300+KIAS that mark the work of a capable airframes shop. OK, I've never been there, or done that. But it seems to me that the slats are *really* simple. Obviously I'm missing something here. What is it about the design and/or maintenance of the slats that requires "a capable airframes shop?" |
#63
|
|||
|
|||
![]()
Been my experience that Mode 1's work great in the FA-18. In fact, have
probably done well over 20 of them on Lincoln, TR and Nimitz. Worked super every time! Biggest mistake guys make is trying to "influence" corrections by helping it out. As I like to say, "don't a touch a nothin'!" |
#64
|
|||
|
|||
![]()
The slats were intended to be used in the landing configuration. As AOA
increased beyond 12 units (not sure what that was in degrees) the aerodynamic slats would deploy. Works great in 1 G flight. They will also deploy at speed during maneuvering, something they were not specifically designed for. A slightly misaligned and or binding slat track would hinder deployment. One comes out, one doesn't and the pilot experiences a significant roll. The effect can be anywhere from mildly annoying to quite thrilling ... usually a function of airspeed, G and rate of G application. Getting three tracks and sets of rollers to align perfectly, not just static but in a dynamic environment, is tricky. Take a sticky dresser drawer and how challenging that can be to get it "just right." Now cube it. There are a lot of things mechanical that aren't rocket science, but still take a lot of skill to do well. R/ John "Paul Michael Brown" wrote in message news ![]() A poorly rigged slat could spell disaster. Not usually a problem if only called upon to do their job in 1 G level flight. It's slat behavior in the flight regime at 300+KIAS that mark the work of a capable airframes shop. OK, I've never been there, or done that. But it seems to me that the slats are *really* simple. Obviously I'm missing something here. What is it about the design and/or maintenance of the slats that requires "a capable airframes shop?" |
#65
|
|||
|
|||
![]()
In article , Paul Michael Brown
wrote: A poorly rigged slat could spell disaster. Not usually a problem if only called upon to do their job in 1 G level flight. It's slat behavior in the flight regime at 300+KIAS that mark the work of a capable airframes shop. OK, I've never been there, or done that. But it seems to me that the slats are *really* simple. Obviously I'm missing something here. What is it about the design and/or maintenance of the slats that requires "a capable airframes shop?" Yep, they are dirt simple until one of the rollers gets a bit sticky or one of the slats gets a little bent then the devils's in the details. As was noted, it doesn't make much of a difference in normal flight but the first time you go into the merge and pitch hard and one sticks it's a pretty damn violent effect that can range from simply a hard roll away from the deployed side that corrects itself, to damn near tumbling the airplane. The guys in my TRARON, who were civilian maint at the time, did a pretty fair job of maintaining them to the point of applying grease and such with Q-tips, they also had a gauge that looked shop-made that they could push on the slats to measure how much force it took to move and they tried to make the slats on each jet the same. Pugs |
#66
|
|||
|
|||
![]()
John- Not usually a problem if only called upon to do their job in 1 G level
flight. It's slat behavior in the flight regime at 300+KIAS that mark the work of a capable airframes shop. BRBR Geeezzz, If I had an A-4...I would have to 'use' the slats to their maximum...It would be fun to beat up other A/C... P. C. Chisholm CDR, USN(ret.) Old Phart Phormer Phantom, Turkey, Viper, Scooter and Combat Buckeye Phlyer |
#67
|
|||
|
|||
![]()
On Sat, 7 Feb 2004 17:00:51 -0600, "Jake Donovan"
wrote: PS - All CIA and NASA birds are registered civil aircraft and could be, if these agencies so desired, sold to private concerns. I included the CIA as many CIA aircraft used in SE Asia made their way back to the US in private hands and are still being flown today. (Mary, I know some of the NASA birds would NEVER be sold) Well, sort of. We assign N-numbers to them, but we don't always bother to tell the FAA which numbers go with which airplanes. I was looking at the N8nnNA registrations one time and found that the only two aircraft listed had been given to museums a while back. We also really can't sell them, exactly. We have to put them on the surplus list, the same way every other agency has to. The list is circulated in-agency, within Federal agencies, and then to state, county, etc, agencies in order. Only after every governmental agency in the entire United States, including the Antelope Valley Mosquito Abatement District, has failed to request the item can it be sold to the public. And I think that GSA handles the actual sale. We surplused the C-47 Gooneybird and a large public university in the south picked it up. It was in flyable condition, too. In fact, we made a mistake and sent the N-number with it and had to have them re-number it because we didn't mean to include the N-number (we couldn't, actually, because these aren't transferrable). In case you're ever thinking of buying anything off the gov't surplus lists, let me give you a little warning. Don't expect to get an unappreciated treasure this way. We usually don't surplus our aircraft because they're either research aircraft, promised to a museum, or ex-military aircraft, with restrictions on disposal (or both). Typically, the support aircraft get turned into displays or gate guards. We gave the city of Lancaster a clapped-out old F-18 for the baseball stadium; the stadium is "The Hangar", where the Jet Hawks play, and the city fathers thought that every hangar needs an airplane, I guess. A few years later, the USAF gave the city an F-4D to put by the Metrolink station. The KingAirs would probably be surplused, though, since they're just stock airplanes, with FAA certifications and everything. They've been maintained to FAA standards, too. But we'll fly them until they really can't be operated properly because it's so hard to get replacements. Then there was the PA-30 Piper Twin Comanche.... Mary -- Mary Shafer Retired aerospace research engineer |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blue Angels Show | ramrod48 | Military Aviation | 6 | September 7th 04 10:01 PM |
Blue Angels star in air show | Otis Willie | Military Aviation | 9 | May 25th 04 05:41 PM |
Once again-Threshold, The Blue Angels Experience | Pechs1 | Naval Aviation | 28 | February 8th 04 12:22 AM |
Blue Angels Video - Is it a Fake? | Ken Morano | Military Aviation | 4 | November 18th 03 10:14 PM |
Blue Angel's Gear Door Broken? | Clay N4AOX | Military Aviation | 15 | October 6th 03 08:01 AM |