My dog ate the list

Hi again all,
I asked for a listing of the Narco 11A pinouts and received same from one of
you gentlemen. Well, no bull****, my pit bull chewed it up before I was able
to make use of it. I understand that the 120A has the same pinout as the
11A, so if some one would take pity on me and resend this info I would be
much obliged. And yes, I did try to go back to the old posting, but it is no
longer on my computer. I assume I must have something set that deletes read
postings, but haven't figured out what and where.
Anyway, again thanks.
Jim Burns

"WhiteKnuckles" wrote in message
...
Hi again all,
I asked for a listing of the Narco 11A pinouts and received same from one
of
you gentlemen. Well, no bull****, my pit bull chewed it up before I was
able
to make use of it. I understand that the 120A has the same pinout as the
11A, so if some one would take pity on me and resend this info I would be
much obliged. And yes, I did try to go back to the old posting, but it is
no
longer on my computer. I assume I must have something set that deletes
read
postings, but haven't figured out what and where.
Anyway, again thanks.
Jim Burns

Jim................

Usenet postings are archived at www.google.com. Do a search for the keywords
in your post.

Good luck,
Rich S.

Well, no bull****, my pit bull chewed it up before I wasable
to make use of it. I understand that the 120A has the same pinout as the
11A, so if some one would take pity on me and resend this info I would be
much obliged. And yes, I did try to go back to the old posting, but it is
no
longer on my computer. I assume I must have something set that deletes
read
postings, but haven't figured out what and where.
Anyway, again thanks.
Jim Burns

Jim................

Usenet postings are archived at www.google.com. Do a search for the keywords
in your post.

Good luck,
Rich S.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Whatz the odds the radio gets fried after spoonfeeding the info?


1 power ground
2 mic ground
3 phones
4 press to talk
5 speaker
6 speaker and phones ground
7 aux audio
8 low level audio
9 mic audio
10 dial lamps
11 intercom
12 switched something, may be Rt
13 +14v in
14 +14v in
15 not labelled.

Thanks, much,
Jim Burns
"Dino Shore" wrote in message
...

Well, no bull****, my pit bull chewed it up before I wasable
to make use of it. I understand that the 120A has the same pinout as
the
11A, so if some one would take pity on me and resend this info I would
be
much obliged. And yes, I did try to go back to the old posting, but it
is
no
longer on my computer. I assume I must have something set that deletes
read
postings, but haven't figured out what and where.
Anyway, again thanks.
Jim Burns

Jim................

Usenet postings are archived at www.google.com. Do a search for the
keywords
in your post.

Good luck,
Rich S.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Whatz the odds the radio gets fried after spoonfeeding the info?


1 power ground
2 mic ground
3 phones
4 press to talk
5 speaker
6 speaker and phones ground
7 aux audio
8 low level audio
9 mic audio
10 dial lamps
11 intercom
12 switched something, may be Rt
13 +14v in
14 +14v in
15 not labelled.