![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hey, you mountain types out there :-) I'm doing some research on a safety
issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. I need as close to the highest elevation in the U.S. as I can get. I'm not dealing with this issue in the context of right or wrong as it pertains to mountain flying. I need to know if the Kollsman window in your altimeters has a wide enough range to allow you, IF YOU DESIRED TO DO SO, to set your altimeters to 0 elevation on a consistent basis before take off at your field instead of a MSL setting. Again, I'm only interested in the possibility, not the right and wrongs involved with doing this. Thanks, Dudley Henriques International Fighter Pilots Fellowship Commercial Pilot/ CFI Retired For personal email, please replace the z's with e's. dhenriquesATzarthlinkDOTnzt |
#2
|
|||
|
|||
![]() "Dudley Henriques" wrote in message nk.net... Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. Leadville, CO is the highest elevation airport in the US (at least so says the sign on the FBO building). Been there once. I can't imagine using QFE in the mountains, not just because of the fact that the instrument won't handle it. You don't have to go very far from a mountain strip until you get into radically different terrain heights. Those altitudes are published in MSL, the relationship to the airport field elevation isn't overly interesting. |
#3
|
|||
|
|||
![]()
Hey, I live at 3650 and can't set my altimeter to zero.
Dudley Henriques wrote: Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. I need as close to the highest elevation in the U.S. as I can get. I'm not dealing with this issue in the context of right or wrong as it pertains to mountain flying. I need to know if the Kollsman window in your altimeters has a wide enough range to allow you, IF YOU DESIRED TO DO SO, to set your altimeters to 0 elevation on a consistent basis before take off at your field instead of a MSL setting. Again, I'm only interested in the possibility, not the right and wrongs involved with doing this. Thanks, Dudley Henriques International Fighter Pilots Fellowship Commercial Pilot/ CFI Retired For personal email, please replace the z's with e's. dhenriquesATzarthlinkDOTnzt |
#4
|
|||
|
|||
![]() "Ron Natalie" wrote in message . .. "Dudley Henriques" wrote in message nk.net... Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. Leadville, CO is the highest elevation airport in the US (at least so says the sign on the FBO building). Been there once. I can't imagine using QFE in the mountains, not just because of the fact that the instrument won't handle it. You don't have to go very far from a mountain strip until you get into radically different terrain heights. Those altitudes are published in MSL, the relationship to the airport field elevation isn't overly interesting. I understand . That's why I specified the context as not being in the right or wrong dept :-)..... (restricted to only the possibility factor). I just can't remember the Kollsman low pressure side maximum for our GA altimeters here in the U.S. I think it's 27.5 or 25.5 but I can't remember exactly which; and I need to have this for a data point. I'm attempting to come up with an average point above sea level based on a standard atmosphere where 0 sets can't be made under normal conditions. Should be easy, but I need that Kollsman range to do it. Right now, with the information I have, I'm at around 2500 feet ASL for that maximum, but not remembering that Kollsman window range, I want to be sure. I just need some verifying data. Thanks Ron, Dudley |
#5
|
|||
|
|||
![]()
Thanks Newps; that jives with what I have so far anyway. I'm assuming a 27.5
low end on the Kollsman. Does that sound right to you. I'm at home and can't check it :-) Dudley "Newps" wrote in message news:5g13c.523826$na.1181072@attbi_s04... Hey, I live at 3650 and can't set my altimeter to zero. Dudley Henriques wrote: Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. I need as close to the highest elevation in the U.S. as I can get. I'm not dealing with this issue in the context of right or wrong as it pertains to mountain flying. I need to know if the Kollsman window in your altimeters has a wide enough range to allow you, IF YOU DESIRED TO DO SO, to set your altimeters to 0 elevation on a consistent basis before take off at your field instead of a MSL setting. Again, I'm only interested in the possibility, not the right and wrongs involved with doing this. Thanks, Dudley Henriques International Fighter Pilots Fellowship Commercial Pilot/ CFI Retired For personal email, please replace the z's with e's. dhenriquesATzarthlinkDOTnzt |
#6
|
|||
|
|||
![]()
I was just at the airport today and I looked at my new overhauled United
altimeter. The lowest setting is 28.10. There is a little travel past that but you'd have to guess at what the setting really is. The station pressure here is usually around 26 inches. Looks like the highest altitude for which you could correct to zero will be about 2000 MSL, depending of course on the actual altimeter setting. Dudley Henriques wrote: Thanks Newps; that jives with what I have so far anyway. I'm assuming a 27.5 low end on the Kollsman. Does that sound right to you. I'm at home and can't check it :-) Dudley "Newps" wrote in message news:5g13c.523826$na.1181072@attbi_s04... Hey, I live at 3650 and can't set my altimeter to zero. Dudley Henriques wrote: Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. I need as close to the highest elevation in the U.S. as I can get. I'm not dealing with this issue in the context of right or wrong as it pertains to mountain flying. I need to know if the Kollsman window in your altimeters has a wide enough range to allow you, IF YOU DESIRED TO DO SO, to set your altimeters to 0 elevation on a consistent basis before take off at your field instead of a MSL setting. Again, I'm only interested in the possibility, not the right and wrongs involved with doing this. Thanks, Dudley Henriques International Fighter Pilots Fellowship Commercial Pilot/ CFI Retired For personal email, please replace the z's with e's. dhenriquesATzarthlinkDOTnzt |
#7
|
|||
|
|||
![]() Dudley Henriques wrote: I just can't remember the Kollsman low pressure side maximum for our GA altimeters here in the U.S. I think it's 27.5 or 25.5 but I can't remember exactly which; and I need to have this for a data point. Perhaps this will help. http://www.ansys.com/industry/aerosp.../whittum1.html George Patterson Battle, n; A method of untying with the teeth a political knot that would not yield to the tongue. |
#8
|
|||
|
|||
![]()
I have it at present somewhere between 2500 and 3000 feet ASL as a possible
limit parameter based on averaging out the altimeter settings for the U.S. It's interesting about the low Kollsman number range. With 28.10, I'm beginning to see some variables in the low range that I didn't know was there. I always assumed all the Kollsmans would all be the same. It will be interesting to see if others have different numbers for their Kollsmans. D "Newps" wrote in message news:Mf33c.87121$PR3.1225813@attbi_s03... I was just at the airport today and I looked at my new overhauled United altimeter. The lowest setting is 28.10. There is a little travel past that but you'd have to guess at what the setting really is. The station pressure here is usually around 26 inches. Looks like the highest altitude for which you could correct to zero will be about 2000 MSL, depending of course on the actual altimeter setting. Dudley Henriques wrote: Thanks Newps; that jives with what I have so far anyway. I'm assuming a 27.5 low end on the Kollsman. Does that sound right to you. I'm at home and can't check it :-) Dudley "Newps" wrote in message news:5g13c.523826$na.1181072@attbi_s04... Hey, I live at 3650 and can't set my altimeter to zero. Dudley Henriques wrote: Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. I need as close to the highest elevation in the U.S. as I can get. I'm not dealing with this issue in the context of right or wrong as it pertains to mountain flying. I need to know if the Kollsman window in your altimeters has a wide enough range to allow you, IF YOU DESIRED TO DO SO, to set your altimeters to 0 elevation on a consistent basis before take off at your field instead of a MSL setting. Again, I'm only interested in the possibility, not the right and wrongs involved with doing this. Thanks, Dudley Henriques International Fighter Pilots Fellowship Commercial Pilot/ CFI Retired For personal email, please replace the z's with e's. dhenriquesATzarthlinkDOTnzt |
#9
|
|||
|
|||
![]()
This is pretty much what I need George. Thanks much.
Dudley "G.R. Patterson III" wrote in message ... Dudley Henriques wrote: I just can't remember the Kollsman low pressure side maximum for our GA altimeters here in the U.S. I think it's 27.5 or 25.5 but I can't remember exactly which; and I need to have this for a data point. Perhaps this will help. http://www.ansys.com/industry/aerosp.../whittum1.html George Patterson Battle, n; A method of untying with the teeth a political knot that would not yield to the tongue. |
#10
|
|||
|
|||
![]()
Dudley, I found reference to an air data computer which would accept an
altimeter setting of 26.75 to 33.00. Stan "Dudley Henriques" wrote in message nk.net... Hey, you mountain types out there :-) I'm doing some research on a safety issue and need your help . I need a post from someone flying out of Colorado somewhere, preferably Telluride or a field very close to Telluride. I need as close to the highest elevation in the U.S. as I can get. I'm not dealing with this issue in the context of right or wrong as it pertains to mountain flying. I need to know if the Kollsman window in your altimeters has a wide enough range to allow you, IF YOU DESIRED TO DO SO, to set your altimeters to 0 elevation on a consistent basis before take off at your field instead of a MSL setting. Again, I'm only interested in the possibility, not the right and wrongs involved with doing this. Thanks, Dudley Henriques International Fighter Pilots Fellowship Commercial Pilot/ CFI Retired For personal email, please replace the z's with e's. dhenriquesATzarthlinkDOTnzt |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Instrument Rating Checkride PASSED (Very Long) | Alan Pendley | Instrument Flight Rules | 24 | December 16th 04 02:16 PM |
Please help -- It's down to the wire | Jay Honeck | Home Built | 12 | July 14th 04 06:05 PM |
FA: WEATHER FLYING: A PRACTICAL BOOK ON FLYING | The Ink Company | Aviation Marketplace | 0 | November 5th 03 12:07 AM |
How I got to Oshkosh (long) | Doug | Owning | 2 | August 18th 03 12:05 AM |
Airport Manager position, Fitchburg, MA | David Reinhart | Piloting | 6 | August 12th 03 11:46 PM |