Looking For A Lycoming IO-360-C136 Core

Anyone in this forum know where I can get a Lycoming IO-360-C1E6 core with a
good crank and crank case? They have to be guaranteed good.

Please post back in this group, and I will contact you. Thanks.

Clyde Torres

On Mon, 23 Aug 2004 02:13:57 GMT, "Clyde Torres"
wrote:

Anyone in this forum know where I can get a Lycoming IO-360-C1E6 core with a
good crank and crank case? They have to be guaranteed good.

Florida.


================================================== ==
Del Rawlins--
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
Remove _kills_spammers_ to reply

"Del Rawlins" wrote in message
...
On Mon, 23 Aug 2004 02:13:57 GMT, "Clyde Torres"
wrote:

Anyone in this forum know where I can get a Lycoming IO-360-C1E6 core
with a
good crank and crank case? They have to be guaranteed good.

Florida.

What is Florida's phone number?

Clyde Torres wrote:

What is Florida's phone number?

Dunno, but here's his website:

http://www.flyinggators.com/news/hurricane/exec.htm

"Darrel Toepfer" wrote in message
.. .
Clyde Torres wrote:

What is Florida's phone number?

Dunno, but here's his website:

http://www.flyinggators.com/news/hurricane/exec.htm

I was at KORL two days after Hurricane Charley, and I didn't see any engines
for sale.

Clyde Torres wrote:

What is Florida's phone number?

Dunno, but here's his website:

http://www.flyinggators.com/news/hurricane/exec.htm

I was at KORL two days after Hurricane Charley, and I didn't see any engines
for sale.

You are not likely to for several months while the Insurance Companies try to
wiggle out of paying as many claims as possible.


Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)

Clyde Torres wrote:

I was at KORL two days after Hurricane Charley, and I didn't see any engines
for sale.

Patience, good things come to those that wait...

If you can't, have you tried Barnstormers.com ? There is a company from
Arkansas that has loads of engines...

"Darrel Toepfer" wrote in message
.. .
Clyde Torres wrote:

I was at KORL two days after Hurricane Charley, and I didn't see any
engines
for sale.

Patience, good things come to those that wait...

If you can't, have you tried Barnstormers.com ? There is a company from
Arkansas that has loads of engines...

I agree, Darrel, but I have a buddy that needs an engine pronto in Israel,
and I'm trying to help him out. I will check out the Arkansas company.

Thanks for the tip.

Clyde Torres
"Say it rapidly five times"

"Clyde Torres" wrote in message
. ..
Anyone in this forum know where I can get a Lycoming IO-360-C1E6 core with
a
good crank and crank case? They have to be guaranteed good.


Hello

I have an IO-360 C1E6 for sale. It has been modified with high compression
pistons, an Ellison throttle body carb, and a lightspeed ignition on one
side (magneto on the other for reliability). It is in the experimental
category, but has only 50 hours on new jugs and pistons.

Estimated 220 HP.

Interested?


Ron Webb