|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
January 11th 04, 04:57 PM
|
|||
|
|||
ASW27drivers
I need to know the Flap settings when thermaling with full water 11.4 lb/sq.ft. Also It would be helpful to know what the average bank angel is with full water or the seconds needed to complete the circle with full water. If you prefer send it to my email address directly. 
|
|
#2
January 12th 04, 12:01 AM
|
|||
|
|||
|
On Sun, 11 Jan 2004 11:57:28 -0500, "Udo Rumpf"
wrote: I need to know the Flap settings when thermaling with full water 11.4 lb/sq.ft. Also It would be helpful to know what the average bank angel is with full water or the seconds needed to complete the circle with full water. 5. The bank angle does depend on the thermal, but generally the 27 likes high AoA's. - no need to fly very fast even with a heavy wing loading (I usually stay below 100 kp/h with full water). Bye Andreas
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
