IPAQ connection problems

Hi,

I posted a while back about having trouble connecting
and Ipaq 3950 to a volkslogger. I took the advice
on board but still cant get it to work. I downloaded
the TTY programme from the winpilot website and ran
it, the ipaq doesnt appear to be receiving any data.


Before I send the cable back as a dud can anyone shed
any light on the 'correct' setting for NMEA output
from the volkslogger?

Also for info, i have made sure all other programs
are closed the IR is turned off so nothing should be
interfering with the connection, however sometimes
i get a message saying that the serial port is allready
in use. This makes me think that cable is sending
data but the ipaq just isnt getting it properly. Any
light anyone can shed on this matter will be gratefully
received.

Many thanks

Mark Brown

Mark,

About the only thing I can suggest is to check all the setting again! Make
sure you have no programs running on the Ipaq (to the extent of resetting
the Ipaq and ONLY installing WinPilot). Lastly, play with the declare
switch. I found that in the wrong position, you will get a message from
WinPilot.

I'm using a cable I purchase from Craggy Aero and WinPilot/Volkslogger./B50
and after I wired it up, it worked the first time. Perhaps you do have a bad
cable.


"Mark Brown" wrote in message
...
Hi,

I posted a while back about having trouble connecting
and Ipaq 3950 to a volkslogger. I took the advice
on board but still cant get it to work. I downloaded
the TTY programme from the winpilot website and ran
it, the ipaq doesnt appear to be receiving any data.


Before I send the cable back as a dud can anyone shed
any light on the 'correct' setting for NMEA output
from the volkslogger?

Also for info, i have made sure all other programs
are closed the IR is turned off so nothing should be
interfering with the connection, however sometimes
i get a message saying that the serial port is allready
in use. This makes me think that cable is sending
data but the ipaq just isnt getting it properly. Any
light anyone can shed on this matter will be gratefully
received.

Many thanks

Mark Brown

Mark

The Volkslogger NMEA setting is - - XX - - - -.

The tty should show the raw data even if the NMEA is incorrect, but
won't if the wiring is incorrect.

Give me a call maybe I can help you.

Richard
www.craggyaero.com
530-905-0062






Mark Brown wrote in message ...
Hi,

I posted a while back about having trouble connecting
and Ipaq 3950 to a volkslogger. I took the advice
on board but still cant get it to work. I downloaded
the TTY programme from the winpilot website and ran
it, the ipaq doesnt appear to be receiving any data.


Before I send the cable back as a dud can anyone shed
any light on the 'correct' setting for NMEA output
from the volkslogger?

Also for info, i have made sure all other programs
are closed the IR is turned off so nothing should be
interfering with the connection, however sometimes
i get a message saying that the serial port is allready
in use. This makes me think that cable is sending
data but the ipaq just isnt getting it properly. Any
light anyone can shed on this matter will be gratefully
received.

Many thanks

Mark Brown

From your description some things are not clear, so I'll suggest you
check that you do not have pins 2 and 3 switched on the cable.

If this is not the problem you may want to try downloading a program
called VLtoIGC from Cumulus-Soaring. This is an iPaq (PDA) utility to
download flights and backup Volkslogger data base. It works around
some iPaq serial port driver problems that may be impeding your iPaq
to PDA connection.

Henryk Birecki

Mark Brown wrote:

Hi,

I posted a while back about having trouble connecting
and Ipaq 3950 to a volkslogger. I took the advice
on board but still cant get it to work. I downloaded
the TTY programme from the winpilot website and ran
it, the ipaq doesnt appear to be receiving any data.


Before I send the cable back as a dud can anyone shed
any light on the 'correct' setting for NMEA output
from the volkslogger?

Sorry Mark

The tty program for troubleshooting the connections can be downloaded
from the WinPilot Site http://www.winpilot.com/Faq.asp

Item 1

Richard
www.craggyaero.com



Mark Brown wrote in message ...
Hi,

I posted a while back about having trouble connecting
and Ipaq 3950 to a volkslogger. I took the advice
on board but still cant get it to work. I downloaded
the TTY programme from the winpilot website and ran
it, the ipaq doesnt appear to be receiving any data.


Before I send the cable back as a dud can anyone shed
any light on the 'correct' setting for NMEA output
from the volkslogger?

Also for info, i have made sure all other programs
are closed the IR is turned off so nothing should be
interfering with the connection, however sometimes
i get a message saying that the serial port is allready
in use. This makes me think that cable is sending
data but the ipaq just isnt getting it properly. Any
light anyone can shed on this matter will be gratefully
received.

Many thanks

Mark Brown