![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
![]()
I have been thinking about selling my pa28-235 for some time, but I dread
the process. I understand why a buyer inexperienced with the model would want a prebuy inspection, and I respect that. But until I have a check in my hand, the plane is still mine and I am going to treat it as such. Buyers need to respect that. Letting some unknown mechanic disassemble, poke and prod MY plane makes me sick to my stomach. Every time things are disassembled/reassembled is a chance for things to get scratched, broken, screws cross-threaded, and so forth. Every time the plane is put in a mechanic's shop is a chance for hangar rash. With advance apologies to the many good mechanics out there, there are also a lot of inept ones and a few that are downright unscrupulous. I'm not going to give one of them the chance to hold my plane hostage at their field for a bogus squawk or something they broke. Now is when several people will jump in with the refrain of "Ooooh, if he won't let your mechanic do an off-field prebuy inspection, then he must be hiding something!!! Run!!!" That's fine, please don't let the door hit you in the *ss on your way out. Obviously this will limit my pool of buyers, and it will take longer to sell. The buyer will have to be someone who is experienced with pa28 and knows what to look for. I'll be happy to remove the inspection panels and take off the cowl, and he can come LOOK at it in MY hanger. If desired, he can have a mechanic of his choice come and LOOK at it in my hangar. But while the plane is still mine, it is not going to the buyer's shop or being touched by the buyer's mechanic. Once the plane belongs to the buyer, he can let anyone he wants do anything he wants with it. Until then, keeping it airworthy and safe from damage is my (and my mechanic's) job. Look but don't touch, and do it at my hangar. A potential sale is not worth the risk of turning the plane over to a mechanic I don't know and/or don't trust. ....Scott |
#42
|
|||
|
|||
![]() I have been thinking about selling my pa28-235 for some time, but I dread the process. I understand why a buyer inexperienced with the model would want a prebuy inspection, and I respect that. But until I have a check in my hand, the plane is still mine and I am going to treat it as such. Buyers need to respect that. Snip I'll be happy to remove the inspection panels and take off the cowl, and he can come LOOK at it in MY hanger. If desired, he can have a mechanic of his choice come and LOOK at it in my hangar. But while the plane is still mine, it is not going to the buyer's shop or being touched by the buyer's mechanic. It's all a matter of degree. In Jack's case, the plane in question had NOT complied with Service Bulletin 1006 (or at least I couldn't see it in the logbooks) -- the "Big One" that addresses wing spar corrosion. I'm assuming that Jack would have wisely required that this SB be complied with, and the spar be checked, before or at the pre-buy. This, of course, means removing the gas tanks -- a MAJOR operation on a Cherokee -- pulling them forward and inspecting the spar. To comply with the SB, you have to paint the spar with anti-corrosion goop, and you might as well replace all the (probably original) fuel lines while you're at it. None of this is cheap, and there is always the opportunity to break, scratch or dent something in the process. Was this the deal killer? Did the seller find someone dumb enough to buy his plane *without* complying with this service bulletin? Dunno. It's a major operation, and I wouldn't blame the seller for not wanting to do it. On the other hand, any Cherokee that has sat outside for any length of time -- and this one was parked on the ramp for a decade of Illinois winters -- must comply with that SB, or (IMHO) it is a completely unsellable aircraft. So, Jack's search continues. Maybe you should sell him your 235, and solve *everyone's* problems! :-) -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
#43
|
|||
|
|||
![]()
FWIW, I'm not the Jack in this story. :-)
-- Jack Allison PP-ASEL-IA Student-Arrow Buying Student "When once you have tasted flight, you will forever walk the Earth with your eyes turned skyward, for there you have been, and there you will always long to return" - Leonardo Da Vinci (Remove the obvious from address to reply via e-mail) |
#44
|
|||
|
|||
![]()
"Doug" writes:
Hey, I'll tell you a story. Actually happened. Jack was running an FBO. He maintained a Cessna 337 for a doctor. Doctor wants to sell and asks Jack to sell it, Jack gets a comission. So a guy comes down from 800 miles away and checks the plane out, says yes I'll take it. Gives Jack a $10K deposit with $120K to be paid upon delivery. Buyer flies home. So Jack gets one of his instructors to deliver the plane, with instructions to pick up the check and fly commercial back. So this instructor flies the 337 to the buyers home field. Buyer gives him an envelope with one of those glasseen windows in it with a Cashiers check in it. Instructor flies back with the check. Jack takes the check out. You know how when they issue a Cashiers check they give you a carbon copy? Well, it's the carbon copy, not the check! So Jack figures honest mistake and calls the buyer and says "we've got to talk about how you are going to get us the check for the airplane". Buyer says, "No, what we're going to talk about is how much I'm going to pay you for the airplane". There is an ending to this story. What is it? -jav |
#45
|
|||
|
|||
![]()
So, Jack's search continues. Maybe you should sell him your 235, and
solve *everyone's* problems! :-) Hmmm, you wanna be my representative again Jay? We could go double or nothing on dinner/beer at Friar tucks :-) -- Jack Allison PP-ASEL-IA Student-Arrow Buying Student "When once you have tasted flight, you will forever walk the Earth with your eyes turned skyward, for there you have been, and there you will always long to return" - Leonardo Da Vinci (Remove the obvious from address to reply via e-mail) |
#46
|
|||
|
|||
![]()
Agreed, if 1006 hasn't been done and the seller refused to pull the tanks
for a spar inspection, I'd walk away too. But as a seller, that still doesn't mean taking the plane to someone else's shop or mechanic. Pulling the tanks isn't that big a deal -- as long as your electric screwdriver batteries don't go dea, and no screws are frozen. On the other hand, if the existing owner hasn't had 1006 done after all this time -- especially if it has EVER POSSIBLY been kept outside -- it would make me look a lot more carefully at the plane to see what else might have been ignored. ....Scott "Jay Honeck" wrote in message ups.com... I have been thinking about selling my pa28-235 for some time, but I dread the process. I understand why a buyer inexperienced with the model would want a prebuy inspection, and I respect that. But until I have a check in my hand, the plane is still mine and I am going to treat it as such. Buyers need to respect that. Snip I'll be happy to remove the inspection panels and take off the cowl, and he can come LOOK at it in MY hanger. If desired, he can have a mechanic of his choice come and LOOK at it in my hangar. But while the plane is still mine, it is not going to the buyer's shop or being touched by the buyer's mechanic. It's all a matter of degree. In Jack's case, the plane in question had NOT complied with Service Bulletin 1006 (or at least I couldn't see it in the logbooks) -- the "Big One" that addresses wing spar corrosion. I'm assuming that Jack would have wisely required that this SB be complied with, and the spar be checked, before or at the pre-buy. This, of course, means removing the gas tanks -- a MAJOR operation on a Cherokee -- pulling them forward and inspecting the spar. To comply with the SB, you have to paint the spar with anti-corrosion goop, and you might as well replace all the (probably original) fuel lines while you're at it. None of this is cheap, and there is always the opportunity to break, scratch or dent something in the process. Was this the deal killer? Did the seller find someone dumb enough to buy his plane *without* complying with this service bulletin? Dunno. It's a major operation, and I wouldn't blame the seller for not wanting to do it. On the other hand, any Cherokee that has sat outside for any length of time -- and this one was parked on the ramp for a decade of Illinois winters -- must comply with that SB, or (IMHO) it is a completely unsellable aircraft. So, Jack's search continues. Maybe you should sell him your 235, and solve *everyone's* problems! :-) -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
#47
|
|||
|
|||
![]()
("Jack Allison" wrote)
Hmmm, you wanna be my representative again Jay? We could go double or nothing on dinner/beer at Friar tucks :-) Dinner too? This just keeps getting better and better g Montblack |
#48
|
|||
|
|||
![]()
fwiw - it really bothers me that there being another potential buyer
could have been a major factor (I'm not saying it was in fact, all we have is Jay's impression). Maybe it's just me, but if a seller takes a deposit and starts the sell/buy process with a buyer, then other potential buyers should not be a consideration. You never know what other people are going to do. When my partners and myself were looking for a plane (which I still have), we followed up the ads in the LA Times one Saturday. The first plane wasn't what we were looking for, so we continued on. As we were leaving a guy in a Cadillac showed up to look at it. The second plane was more like it - much newer, well equipped, and reasonably priced - Not that there weren't some maintenance questions to be answered. After we'd been there awhile and were discussing making an offer among ourselves, the Cadillac guy shows up. Within no more than five minutes and no more than a few cursory glances over the plane, he's writing a check. Dunno if it was a deposit or full price - we walked away at that point. David Johnson |
#49
|
|||
|
|||
![]()
Montblack wrote:
Dinner too? This just keeps getting better and better g Like I said before, Paul *who*? :-) -- Jack Allison PP-ASEL-IA Student-Arrow Buying Student "When once you have tasted flight, you will forever walk the Earth with your eyes turned skyward, for there you have been, and there you will always long to return" - Leonardo Da Vinci (Remove the obvious from address to reply via e-mail) |
#50
|
|||
|
|||
![]()
I think you're right on, Scott. My feelings exactly.
"Scott" wrote in message ... But until I have a check in my hand, the plane is still mine and I am going to treat it as such. Buyers need to respect that. ...Scott |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
430/530 Back Course Question... | Bill Hale | Instrument Flight Rules | 3 | February 12th 04 05:04 AM |
Memories come flying back for ex-air corpsmen | Otis Willie | Military Aviation | 0 | September 10th 03 08:56 PM |
The Little Wheel in Back | Veeduber | Home Built | 6 | September 8th 03 10:29 AM |
Localizer Back Course vs. ILS | ilsub | Instrument Flight Rules | 8 | August 25th 03 04:04 PM |
they took me back in time and the nsa or japan wired my head and now they know the idea came from me so if your back in time and wounder what happen they change tim liverance history for good. I work at rts wright industries and it a time travel trap | tim liverance | Military Aviation | 0 | August 18th 03 12:18 AM |