A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Parajumper breaks legs???



 
 
Thread Tools Display Modes
  #11  
Old April 26th 05, 07:13 PM
external usenet poster
 
Posts: n/a
Default


LCT Paintball wrote:

When you say spin, do you mean a controlled radial decent, or an

O-Crap I'm
in a spin?


Generally speaking, when you do a spin on purpose, you leave out the
"Oh crap" part.

John Galban=====N4BQ (PA28-180)

  #12  
Old April 26th 05, 07:31 PM
Bertie the Bunyip
external usenet poster
 
Posts: n/a
Default

http://www.local6.com/firstnews/4410256/detail.html
  #13  
Old April 26th 05, 08:38 PM
jerry wass
external usenet poster
 
Posts: n/a
Default



Bertie the Bunyip wrote:
http://www.local6.com/firstnews/4410256/detail.html


Many thanks for all the replies...Jerry


ps I, too, thought a spin is a spin, is a spin---(except inverted)
  #14  
Old April 26th 05, 08:50 PM
Stuart Fields
external usenet poster
 
Posts: n/a
Default

As a past sky diver driver, I used to dump them at 7200 out of a Cessna 182,
and touch down the same time they did. The process I used was to first
close the cowl flaps, close the throttle to 15" of mp.and roll into a steep
bank. I didn't spin but I did have a tight spiral and typically saw the VSI
go to numbers like 8,000fpm.
I agree it does sound like the plane ran into the jumper. We used to have a
BT-13 pilot that loved to split S after the jumpers left the back seat and
then when the guys got their chutes open, he would buzz just over the top of
your canopy. It gave me a good dose of adrenalin the first time he did it
to me.
S. Fields
"Nick Funk" wrote in message
...
I have seen jump planes beat the sky diver down. Many times I have seen
the pilot put a plane (Cessna) into a spin from 10,000 to 12,000 feet
and pull at about 1500 feet, usually near the downwind leg of the
pattern. Many times the plane is on the runway before the sky diver
touches down.



jerry wass wrote:
How did the jumper jump outa that plane, travel upward & forward & break
his legs on the L.E. of the wing outboard the engine nacele ???
'twas on the OK news last nite, but didn't catch where it happened..



  #15  
Old April 26th 05, 10:37 PM
Rich Ahrens
external usenet poster
 
Posts: n/a
Default

Stuart Fields wrote:
As a past sky diver driver, I used to dump them at 7200 out of a Cessna 182,
and touch down the same time they did. The process I used was to first
close the cowl flaps, close the throttle to 15" of mp.and roll into a steep
bank. I didn't spin but I did have a tight spiral and typically saw the VSI
go to numbers like 8,000fpm.


You had a VSI in a 182 that read up to 8000?
  #16  
Old April 26th 05, 10:51 PM
Bertie the Bunyip
external usenet poster
 
Posts: n/a
Default

Rich Ahrens :

Stuart Fields wrote:
As a past sky diver driver, I used to dump them at 7200 out of a
Cessna 182, and touch down the same time they did. The process I
used was to first close the cowl flaps, close the throttle to 15" of
mp.and roll into a steep bank. I didn't spin but I did have a tight
spiral and typically saw the VSI go to numbers like 8,000fpm.


You had a VSI in a 182 that read up to 8000?


Must be a 182 SP
  #17  
Old April 26th 05, 11:08 PM
Matt Whiting
external usenet poster
 
Posts: n/a
Default

Stuart Fields wrote:
As a past sky diver driver, I used to dump them at 7200 out of a Cessna 182,
and touch down the same time they did. The process I used was to first
close the cowl flaps, close the throttle to 15" of mp.and roll into a steep
bank. I didn't spin but I did have a tight spiral and typically saw the VSI
go to numbers like 8,000fpm.
I agree it does sound like the plane ran into the jumper. We used to have a
BT-13 pilot that loved to split S after the jumpers left the back seat and
then when the guys got their chutes open, he would buzz just over the top of
your canopy. It gave me a good dose of adrenalin the first time he did it
to me.


I think I'd give that pilot a good dose of adrenalin when I stuffed my
..44 mag under his nose after a stunt like that...


Matt
  #18  
Old April 26th 05, 11:38 PM
Dave S
external usenet poster
 
Posts: n/a
Default



Ron Natalie wrote:
Dave S wrote:


My speculation is that unless Mr. Wing had paradropped into a MASH
unit, he was doomed by his injury, having significantly bled out in
the last minute of his descent. Even if a trained paramedic crew was
right there and on the scene immediately, they would have had a hell
of a fight (to save him) on their hands.

A paramedic crew can't do squat except try to stop things from getting any
worse while rushing him to a surgical (preferably trauma staffed)
facility. Unlike cardiac and other medical cases where the paramedics
have stuff they can do to actually treat in the field, it's still pretty
much swoop and scoop for large-scale trauma.


I agree 100% Before I started working as a nurse in trauma centers, I
was an active paramedic (and still maintain my paramedic credentials to
this day). You see and do a lot in 15 years.

Dave

  #19  
Old April 27th 05, 05:01 AM
videoguy
external usenet poster
 
Posts: n/a
Default


"Nick Funk" wrote in message
...
I have seen jump planes beat the sky diver down.


[snip]

Many times the plane is on the runway before the sky diver touches down.


OK, lets explain this a little more to this non pilot and non jumper. Seems
to me that logic dictates that if the divers are all trying to land at the
airport, why would the jump plane try to get there around that same time?

How long does it take for the divers to reach ground? 2 minutes? 4 minutes?
Surely not much more than that. Why would the plane not descend at a pace
to place them in the pattern after the jumpers had cleared the area? Does
the 3-5 minutes flying time the plane saves by trying to beat the jumpers
seem significant?

I would appreciate any responders remembering that I am not a pilot, nor a
jumper. Answers with some supporting details would be appreciated.

Thanks,
GWK


  #20  
Old April 27th 05, 05:27 AM
Jerry Springer
external usenet poster
 
Posts: n/a
Default

videoguy wrote:
"Nick Funk" wrote in message
...

I have seen jump planes beat the sky diver down.



[snip]


Many times the plane is on the runway before the sky diver touches down.



OK, lets explain this a little more to this non pilot and non jumper. Seems
to me that logic dictates that if the divers are all trying to land at the
airport, why would the jump plane try to get there around that same time?

How long does it take for the divers to reach ground? 2 minutes? 4 minutes?
Surely not much more than that. Why would the plane not descend at a pace
to place them in the pattern after the jumpers had cleared the area? Does
the 3-5 minutes flying time the plane saves by trying to beat the jumpers
seem significant?

I would appreciate any responders remembering that I am not a pilot, nor a
jumper. Answers with some supporting details would be appreciated.

Thanks,
GWK


Hmmmm.... video guy, looking for some gory details?
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Gear Legs for '59 Cessna 150 Burt Compton Aviation Marketplace 0 March 22nd 04 03:03 PM
Cessna landing gear legs Reserve MET! Bill Berle Aviation Marketplace 0 February 22nd 04 07:50 PM
Cessna landing gear legs Reserve MET! Bill Berle Restoration 0 February 22nd 04 07:50 PM
Wanted: Gear Legs 1959 C-150 Burt Compton Home Built 0 December 29th 03 04:32 PM
Wanted: Gear Legs C-150 (1959) Burt Compton Aviation Marketplace 0 December 29th 03 04:18 PM


All times are GMT +1. The time now is 09:44 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.