|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
September 9th 06, 02:37 AM
posted to rec.aviation.owning
|
|||
|
|||
KR-21
Can anyone direct me to a pinout for a King KR-21 Marker beacon Receiver
Thanks Paul N1431A 
|
|
#2
September 14th 06, 12:18 AM
posted to rec.aviation.owning
|
|||
|
|||
|
KR-21
Tri-Pacer wrote: Can anyone direct me to a pinout for a King KR-21 Marker beacon Receiver Thanks Paul N1431A KR-21 pinout J=ant H=ant ground K=ground (- 12 volts) C=power (+12 volts) E=audio Hope this helps. Jim
|
|
#3
September 15th 06, 07:40 PM
posted to rec.aviation.owning
|
|||
|
|||
|
KR-21
Hmm... I thought I had the KR-21 manual but it's the KR-20.
Anyway, if you need the manual for that one (install and ops) it's http://www.bd5.com/kr-20.pdf "jim" wrote in message oups.com... Tri-Pacer wrote: Can anyone direct me to a pinout for a King KR-21 Marker beacon Receiver Thanks Paul N1431A KR-21 pinout J=ant H=ant ground K=ground (- 12 volts) C=power (+12 volts) E=audio Hope this helps. Jim -- Posted via a free Usenet account from http://www.teranews.com
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
