![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
On Feb 18, 6:55*pm, "Morgans" wrote:
"Robert M. Gary" wrote *Anyone with a fuel injected engine should put buying something like an EDM high on their priority list. As a side benefit, such a device will show you voltage at all times so you can track it durin the flight if its not holding steady. EDM? *I know I will be smacking my forehead when someone tells me what it is. *g -- Jim in NC Its the engine monitor product made by JPI. GEM makes one as well. There are some additional companies that make simple gauges to just show the temps but those are the only two that make full engine monitors. -Robert |
#12
|
|||
|
|||
![]()
Robert M. Gary wrote:
Its the engine monitor product made by JPI. GEM makes one as well. There are some additional companies that make simple gauges to just show the temps but those are the only two that make full engine monitors. -Robert Electronics International also makes a fantastic, full featured engine monitor, at a better price, and with much better customer support! http://www.buy-ei.com/Pages/UBG/UBG-16_Overview.html Happy Flying! Scott Skylane |
#13
|
|||
|
|||
![]()
On Feb 19, 12:35*am, Scott Skylane wrote:
Robert M. Gary wrote: Its the engine monitor product made by JPI. GEM makes one as well. There are some additional companies that make simple gauges to just show the temps but those are the only two that make full engine monitors. -Robert Electronics International also makes a fantastic, full featured engine monitor, at a better price, and with much better customer support! http://www.buy-ei.com/Pages/UBG/UBG-16_Overview.html Happy Flying! Scott Skylane That is the "GEM" until (that is what EI has traditionally called their product). It certainly has less features than JPI's EDM but it is a good engine monitor. I'ave had great support from JPI though. -Robert |
#14
|
|||
|
|||
![]()
On Feb 18, 8:21*pm, Clark wrote:
"Robert M. Gary" wrote in news:0376f630-5016-4914-8539- : On Feb 18, 6:55*pm, "Morgans" wrote: "Robert M. Gary" wrote *Anyone with a fuel injected engine should put buying something like an EDM high on their priority list. As a side benefit, such a device will show you voltage at all times so you can track it durin the flight if its not holding steady. EDM? *I know I will be smacking my forehead when someone tells me what it is. *g -- Jim in NC Its the engine monitor product made by JPI. GEM makes one as well. There are some additional companies that make simple gauges to just show the temps but those are the only two that make full engine monitors. -Robert Dynon will be suprised to hear that... Good, then its good for them to hear that. I'm not aware of any STC for the Dynon products in the M20E. -Robert |
#15
|
|||
|
|||
![]()
Robert M. Gary wrote:
That is the "GEM" until (that is what EI has traditionally called their product). /snip/ -Robert Um, no. See http://www.insightavionics.com/gem610.htm Happy Flying! Scott Skylane |
#16
|
|||
|
|||
![]()
On Feb 19, 11:51*am, Scott Skylane wrote:
Robert M. Gary wrote: That is the "GEM" until (that is what EI has traditionally called their product). /snip/ -Robert Um, no. *See *http://www.insightavionics.com/gem610.htm Happy Flying! Scott Skylane I'm pretty familiar with the GEM unit. I've read the corporate glossies. Its a good unit, but does not come with as many features out of the box as the JPI EDM unit. -Robert |
#17
|
|||
|
|||
![]()
On Feb 19, 7:23*pm, Clark wrote:
Now now Robby, that's not what you typed. You typed that only JPI and GEM make full engine monitors. Do try to be honest. At least a little bit. 'kay? I think if you look at the subject line you will see "Mooney M20E IO 360". There is no STC for your unit for such an aircraft so I don't see how you can claim its a choice in play here. -Robert |
#18
|
|||
|
|||
![]()
Robert M. Gary wrote:
On Feb 19, 11:51 am, Scott Skylane wrote: Robert M. Gary wrote: That is the "GEM" until (that is what EI has traditionally called their product). /snip/ -Robert Um, no. See http://www.insightavionics.com/gem610.htm Happy Flying! Scott Skylane I'm pretty familiar with the GEM unit. I've read the corporate glossies. Its a good unit, but does not come with as many features out of the box as the JPI EDM unit. -Robert Sorry if I wasn't clear, I was trying to point out that the GEM is made by an entirely different company (Insight) than EI. EI has never called any of their units "GEM", and the EI UBG is a very full featured engine monitor, suitable for installation in a Mooney M20E, and is made by a company who's customer service is second to none, in my experience. Happy Flying! Scott Skylane |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
about lycoming IO360 A1B6 | Philippe Vessaire | Home Built | 1 | March 12th 07 09:14 PM |
Mooney Electric Trim Problem | [email protected] | Owning | 2 | September 5th 05 06:16 PM |
Mooney Low Voltage | [email protected] | Owning | 22 | August 1st 05 01:01 PM |
Mooney Engine Problem in Flight - Advise | Paul Smedshammer | Owning | 17 | December 21st 04 06:39 AM |
Mooney M20E: pre-1969 vs 1969+ | Jeff Meininger | Owning | 6 | September 16th 04 06:24 PM |